Name And Function Of Each Part - Vision IMC-922 User Manual

HD-SDI camera user manual
2.

Name and Function of Each Part

Side
Name
① Holder
② Lens Mount
Rear
Name
① Power & I/O Port
② HD-SDI Video Output
③ SETUP Switch
M e g a p i x e l B o x C a m e r a
For attaching a bracket to the camera
Adaptor ring is tightened for C or CS mount lens
Power Cable Connector (DC12V ~ 24V) / RS-485 + -
BNC connector for HD-SDI video signal output
Camera function control switch
Press and hold the switch for more than 2 seconds, then the main
menu will appear on the screen.
Move from left side to right side, then the menu is moved
◀/▶
to upper menu or the parameter is changed
Move up and down, then the menu is moved up and down
▲/▼
Press and the feature is set
■
Press it, then it is moved to sub menu
Function
Function
Page 5