Before You Start - Vision IMC-922 User Manual

Page 2 HD-SDI Camera user manual
INFORMATION - This equipment has been tested and found to comply with limits for a Class A
digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at their own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
CAUTION - To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than those specified.

Before You Start

This manual should help you in the installation and set-up of the camera; and we recommend that you
carefully follow the instructions described. To ensure that your warranty remains valid, please read
the manual carefully before using the camera.
Precautions
- Please DO NOT disassemble, modify or repair the camera. There are no user serviceable parts
inside and disassembling the camera may void the warranty. For prevention of fire or electric shock,
DO NOT removes screws or covers from the camera.
- Operation in a wet environment is NOT recommended. The camera SHOULD NOT be exposed to
rain or moisture.
M e g a p i x e l B O X C a m e r a