Table of Contents
Advertisement
TABLE 11: RS-232 MENU ITEM DEFINITION
Item
Serial Number of the SSPB unit (B2309, in this case)
S/N:
Version number of the software within the SSPB unit (1.0, in this case)
Soft:
Indicates which path the SSPB is connected to in a 1:1 redundant system:
Unit Pos:
'A' or 'B'. For a standalone unit, the display 'N/A' is indicated (for Not
Applicable)
Name:
Name of the SSPB unit (200 C, in this case)
M&C communication address for RS-485 interface (0x01, in this case)
MAC:
Total current consumption from the +12 V DC power supply, in amperes
Current:
(030.4 A, in this case)
Transmission Local Oscillator frequency in MHz (4900, in this case)
TxF shift:
Forward (output) Power in dBm (21.0 dBm, in this case)
FPWR:
Transmission Gain in dB (62.0 dB, in this case)
TxGain:
Transmission Status (On, in this case; might be On-for RF On or Off- for
Tx Stat:
MUTE)
Reverse (reflected) Power in dBm (00.0 dBm, in this case – any value
RPWR:
below 20.0 dBm will be displayed as 0.00 dBm)
Hot Spot temperature in °C (+035.3 °C, in this case)
Temp HS:
Power Supply voltage in volts (+012.1 V, in this case)
PS:
Provides the fault messages and the normal status message:
1. Alarm (excess +12 VDC current, faulty RF devices, power supply
Alarms:
failure, or L-Ku up-converter module failure).
2. Temperature shutdown (ambient temperature exceeds 85ºC).
3. OK (SSPB is functioning properly).
Status of Transmission W/G Switch (N/C, in this case, for Not Connected)
Tx WGSW:
Description
SSBP-3000C
Page 36
Advertisement
Table of Contents
