Table of Contents
Advertisement
Operating Your Camera
Menu Setup
Use the Function Switch switch on the main body of the camera.
Function Setup switch
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
MAIN SETUP
1.LENS
Select the function by
moving up or down direction
2.EXPOSURE
of function setup switch.
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
Notes
• A n item with the
icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
• A n item with the - - - icon is unavailable due to function settings.
16
COLOR DOME CAMERA
DC
Change the status by
moving right or left direction
of function setup switch.
ATW
OFF
ON
AUTO
User's Manual
LENS
Using this function, you can control screen brightness.
1. When the SETUP menu screen is displayed, select 'LENS' by using the Function Setup
switch so that the arrow indicates 'LENS' .
MAIN SETUP
1.LENS
2.EXPOSURE
DC : Select Auto Iris Lens
• When DC is selected, you can control screen
brightness. The range of brightness control is
between 1 and 70. Adjust the brightness
appropriately for optimal screen brightness.
EXPOSURE
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select
'EXPOSURE' by using the Function Setup switch so that
the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
SHUTTER : Because of using built--in dc lens, shutter speed is fixed at 1/60(1/50)
basically.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
COLOR DOME CAMERA
DC
DC
ATW
17
User's Manual
Advertisement
Table of Contents
