Table of Contents
Advertisement
Operating Your Camera
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR so that noise is not reduced.
ON : Activates SSNR so that noise is reduced.
3. Set the SSNR mode to 'ON' and press the Function
Setup switch. Then you can adjust the noise reduction
level.
Notes
• Y ou cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
• W hen adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
DAY/NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the
Function Setup switch so that the arrow indicates 'DAY/NIGHT'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6.DAY/NIGHT
7.IMAGE ADJ
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
22
COLOR DOME CAMERA
DC
ATW
OFF
ON
AUTO
User's Manual
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
To turn on or off the burst signal on B/W mode, use
the Function Setup switch.
AUTO : The mode is switched to 'Color' in a normal
environment, but switches to 'B/W' mode when
ambient illumination is low. To set up the
switching time or speed for AUTO mode, press the
Function Setup switch.
- DWELL TIME : You can select the duration time about
changing the day/night mode.
→...5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
- DURATION : You can select brightness of illumination
about changing the day/night mode.
Color →...B/W
B/W →...Color
Fast
2.5 lux
4 lux
Slow
0.8 lux
6 lux
Notes
• Y ou cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is
At this time, the exchange between DAY mode and NIGHT mode operates as like
selecting
'
COLOR
'
mode.
• T he OSD key does not work for a few seconds when switching to Color or B/W, to ensure
stable camera operation.
• T he camera may focus less well under infrared illumination than under normal illumination.
IMAGE ADJ.
1. When the SETUP menu screen is displayed, select 'IMAGE ADJ.' by using the Function
Setup switch so that the arrow indicates 'IMAGE ADJ.'
COLOR DOME CAMERA
* The brightness of illumination is changeable by
installed environment.
'
'
OFF
.
23
User's Manual
Advertisement
Table of Contents
