Table of Contents
Advertisement
Installation
Installation
Notes
• T he installation should be done by qualified service personnel or sysytem installers.
• I f the ceiling material is not strong enough to hold the installation screws, the camera
may fall off. Reinforce the ceiling as needed.
1) Separate the dome cover by counterclockwise rotation.
2) Separate the shield case by pulling from the camera body.
Latch
Locking direction
[Figure-1]
Unlocking direction
(Counterclockwise)
10
COLOR DOME CAMERA
* To install the dome cover on the camera
body, turn the latches in locking direction
as shown in the figure 1.
Main Body
(Camera)
Shield Case
Locking direction
(Clockwise)
Dome cover
User's Manual
When installing on a adapter plate
1) Place the bracket provided on the installation
An arrow for installing directions
adapter plate
2) When placing the camera body on the plate,
3) When placing the camera body on the plate,
M4 tapping
screw (provided)
4) After installation and adjustment of the camera
CAMERA
Locking
direction
Unlocking
direction
Dome cover
Notes
• P lease locate an arrow on bracket for installing direction that you wish to observe
Area and then fix it with the M4 tapping screws.
COLOR DOME CAMERA
Installation
surface and fix it with the M4 tapping screws
(provided).
insert the plate pin into the mounting hole on
the body as shown in figure-1 and fix it by
turning clockwise.
make sure the power and the BNC cables pass
through their respective designated holes.
(When placing the cable through its side, thread
it through the hole at the bottom.)
are complete, secure the dome cover by turning
it clockwise.
Plate pin
Locking direction
Unlocking direction
[Figure-1]
11
User's Manual
Advertisement
Table of Contents
