Radio Operation - Power Acoustik PDR-340 Owner's Manual

AV IN (OPTIONAL)
Connect an optional AV cable to your external AV device (such as a video camera), then press the
MODE button to switch to the AV mode. Note: If there is no external video input, the TFT displays
"NO SIGNAL".
Parking
When the car is stopped and the parking brake is working, the screen can display the video image,
and otherwise the screen display warning information.

Radio operation

Band selection
In Radio mode, press BAND button on the RC or front panel to select your band of choice in the
following sequence:
FM 1 FM 2 FM 3 AM1 AM2
Manual tuning
To find a station, select a band first, then press and hold / buttons on the RC until Manual
appear on the display. Then press repeatedly these buttons to search for the needed frequency
upward or downward.
Auto tuning
To find a station, select a band first, then press / buttons on the panel or press /
buttons on the RC, the automatic search will start downward or upward. It will stop when a station
is found.
Select a station
Repeatedly press / buttons on the panel to select a present station downward or upward.
Or press digital number (1-6) on the RC to select any present station.
Preset scan
In tuner mode, press the AS/PS on the panel or RC to scan the preset memorized station, each
preset scan for 5 seconds. Press again to stop operation.
Auto store
In tuner mode, Press the AS/PS on the panel or RC and hold for 2 seconds to store radio stations
with the best reception to the preset number automatically.
Manual store
In tuner mode, long press the number 1-6 buttons on the RC after you find the station you desired.
The station will preset to the corresponding number.
In tuner mode, long press the MEM button on the front panel after you find the station you desired,
then rotate the VOL knob to select the number 1-6 on the radio interface, press the VOL/OK button
on the front panel to confirm. The station will preset to the corresponding number.
13