Table of Contents
Advertisement
3.
Push button 1 to check for other messages.
4.
Press button 2.
The display again shows the outside tem-
perature and the time.
Viewing more information later
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Info sources" and press the control-
ler.
4.
Select "Service Info" and press the control-
ler.
5.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Check Control messages" is selected
and press the controller.
72
Online Edition for Part no. 01 41 0 014 699 - © 10/07 BMW AG
6.
Select a text message and press the con-
troller.
To exit the display:
Select
and press the controller.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
After the warning, you are only alerted to reach-
ing this speed a second time if your vehicle
speed falls below it again by at least 3 mph or
5 km/h.
iDrive, for operating principle refer to page 16.
1.
Open the start menu.
2.
Call up "Navigation".
3.
Select "Car Data" and press the controller.
4.
Select "Limit" and press the controller.
Setting or changing the limit
1.
Select speed value and press the controller.
2.
Turn the controller to set the limit.
3.
Press the controller to apply the setting.
Advertisement
Table of Contents
