Speed Limit - BMW 323i Owner's Manual

3. Select "Info sources" and press the control-
ler.
4. Select "Service" and press the controller.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Check Control messages" is selected
and press the controller.
6. Select a text message and press the con-
troller.
To exit the display:
Select and press the controller.

Speed limit

You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
84
Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
4. Select "Limit" and press the controller.
Setting or changing the limit
1. Select speed value and press the controller.
2. Turn the controller to set the limit.
3. Press the controller to apply the setting.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating the limit
Select "On" and press the controller.
Limit is activated.
Stopwatch
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.