Lambretta Uno50 Owner's Manual page 12

Fastening hardware:
Road test
(approx. 10km):
After road testing:
Check front and rear axle nut and bolt torque.
Check torque of drain plug and oil filter bolt.
Check torque of all brake system nuts and bolts.
Check torque of all steering system mounting hardware.
Check torque of exhaust mounting hardware.
Check torque of all remaining nuts, bolts & screws.
Front and rear brake operation.
Check cold engine start performance.
Evaluate performance, handling and braking.
Check hot engine starting.
Check and adjust idle speed.
Check for oil and fuel leaks.
Make necessary adjustments and repair any defects seen or observed
before, during and after test drive. Retest as necessary.
Clean the vehicle prior to delivery.
12