Setting Up Your Phone - Sanyo S1 User Manual

Setting Up Your Phone

1.
Install the battery (if necessary).
Slide the battery release latch and then slide the battery cover
and remove it from the back of the phone.
Insert the battery into the opening, making sure the connectors
align. Gently press down to secure the battery.
Replace the battery cover and slide it until you hear a click.Then,
slide the battery release latch.
(See "Installing the Battery" on page 16 for the illustration.)
2.
Press and hold
Your phone will turn on, search for wireless service, and enter
standby mode.
If your phone is locked, see "Unlocking Your Phone"on the next
page for more information.
3.
Make your first call.
Use your keypad to enter a phone number.
Press
Your phone's battery should have enough charge to turn on, find a signal,
Note
set up your voicemail, and make a call.You should fully charge your
battery as soon as possible. See "Charging the Battery"on page 17 for
details.
to turn the phone on.
.
Section 1A: Setting Up Service 3