Pairing Bluetooth Devices - Sanyo S1 User Manual

Pairing Bluetooth Devices

Paired Devices
The Bluetooth pairing process allows you to establish trusted connections
between your phone and another Bluetooth device.When devices are
paired, a passcode (sometimes called a PIN) is shared between devices,
allowing for fast, secure connections while bypassing the discovery and
authentication process.
If Bluetooth is not enabled on your phone, you will be asked to enable it
Note
before you can proceed with the pairing process.
To pair your phone with another Bluetooth device:
1.
Press
(Your phone will display a list of discovered in-range Bluetooth
devices.)
2.
Select the device you wish to pair with and press
3.
Select Add to Trusted.
4.
Enter the PIN and press
enters the same PIN, the pairing is complete.)
Waiting for Request
If you are going to be using a Dial-Up Network (DUN) profile to pair with a PC
or PDA, you will need to allow the other device to initiate pairing with your
phone.
To allow your phone to be paired with another Bluetooth device:
1.
Press
Wait for Request.
2.
Follow the onscreen prompts to enter your PIN and press
118 Section 2I: Using Bluetooth
> Tools > Bluetooth > Add New > Search.
> Tools > Bluetooth > Add New >
. (When the owner of the other device
.
.