Calling Voicemail - HTC Touch Pro2 User Manual

Global Smart Dialing (International Calls)
When the Global Smart Dialing feature is enabled, placing international calls is a lot easier. You can
preconfigure the country where you are calling from and the country to call to, and then simply enter
the 10-digit number when placing your international call. Both the international access code and country
code will automatically be prepended to the number.
Configuring Global Smart Dialing
To enable Global Smart Dialing and preconfigure the dialing codes:
1. Press the Talk key to open the Phone screen.
2. Tap Menu , scroll down the menu, and then tap Global Smart Dialing .
3.
Select the Enable Global Smart Dialing check box.
4.
By default, the international access code has already been set to that for the United States. You do not
need to change it if you are making international calls from the United States.
However, if you are placing international calls from another country, select the country in which you are
located from the Dial from list. If the country is not in the list, enter its international access code in the
International Direct Dialing Code
5.
Select the country to which you are calling from the Dial to list. The corresponding country code will
appear in the Country Code box. (You cannot change the country code.)
6.
Tap Done .
Note You can also configure Global Smart Dialing to automatically prepend the U.S. country code (1) when you place
domestic calls. Select United States from both the Dial from and Dial to lists. When you place your call, you only
need enter the 10-digit number.
Using Global Smart Dialing
To use Global Smart Dialing to place an international call:
1. On the Phone screen, directly enter the 10-digit number to call. This number includes the area code and
phone number.
2. Tap on the Phone screen or press the Talk key to place the call. Your device will dial the
complete number including the international access code, the country code, and the 10-digit number,
Direct Dial
Note When Global Smart Dialing is not enabled, or when the number you want to call (area code and phone number)
contains fewer than 10 digits, you need to use direct dialing to place international calls.
To use direct dialing to place an international call:
Enter the international access code, the country code, the city or area code, and the phone number, and
then tap to complete the call.

Calling Voicemail

is reserved for your voicemail. Tap and hold
retrieve your voicemail messages. For more information about using voicemail, see "Voicemail" on
page 128.
box.
on the Phone keypad to call voicemail and
Section 2D. Using Phone Features 59