Table of Contents
Advertisement
TCL-IP (8) User Manual
2.1.2 Protocol Setting
The phone supports SIP protocol
After finishing the network setting, enter " protocol" interface
(Figure2.4)，all the parameters filled in the below form are provided
by the ISP.Upon the completion of the network setting and the
protocol setting, you need to restart your phone before using.the
detailed setting are as figure2.4.
Figure 2.4 SIP protocol setting interface
2.1.3 PPPoE configuration
If using PPPOE mode to go into the nertwork, please use PPPOE
function. The user can enter the "PPPOE Setting" menu, and key into
the user name and password of the PPPOE, click"next" to set NAT,
click "save"button after setting the LAN IP and LAN subnet.
TCL communication
www.tclcomm.cn
10
Advertisement
Table of Contents
