TCL IP phone User Manual page 18

TCL-IP (8) User Manual
"missed calls"and "accepted calls"one by one; Press the
"set"key prior to pressing 'page up' 、'page down' keys to play
the "phone log" information, and user can dial out the phone number
in the phone log directly by pressing the shortcut key 'set' in off state.
Note: it can hold each 10 unaccepted, accepted and dialed calls at
most. And the first record will be refurbished when it is full.
Number book key Introduce
Press the 'Number Book' key, and LCD will enter the state of
browsing the Number Book. Now the 'page up' key will leaf up and
play the numbers of the names and the corresponding phone numbers
one by one, In off state, the present number displayed on LCD will be
dialed out by pressing the 'set' key.
Ring key selection introduce
Press the 'ring' key, and LCD will enter the state of browsing and
selecting the rings. Now, press the 'page up' key will leaf up and play
the names of the rings recorded in the phone, and the 'page down'
key works on the opposite side. In off or standby state, press the "Set"
key to set the current ring displayed on the screen as default ring.
Setting IP address of the phone by keyboard
The same as web setting, you can choose the DHCP mode or static IP
mode to set the IP address for the unit.
A、DHCP Mode
Press the "Menu" key, and the LCD displays the request for your
password whose default value is 123456 (you can set the password
yourself). If the password passed, you can enter the setting mode;
Press the "Page Up"key to scan the menu until you find the item
"NETWORK""USER DHCP",and press the"Set"key to store
the information, then it will appear the prompt info after double Press
the "Cancel"key,at last, press"Set"key to restart the phone.
TCL communication www.tclcomm.cn
18