TCL IP phone User Manual page 15

TCL-IP (8) User Manual
2.1.7 System tools
2.1.7.1 Default setting
Click the "Factory default" to enter the factory default interface, click
"restore"button to resume to factory default setting value.See as
Figure 2.14
Figure 2.14 Restore to factory default setting interface
2.1.7.2 Software upgrading
The Phone supports to be upgraded by HTTP mode; the operation
steps are as below:
The following interface will appear when Clicking"system
upgrade"button,，then get to the program files you want by the
browse button，upgrade the software by clicking "start"button.
Figure 2.15 System upgrade interface
2.1.7.3 System restart
Note：All the settings go into effect after saving all the setting
TCL communication
15
www.tclcomm.cn