TCL IP phone User Manual page 19

TCL-IP (8) User Manual
B、Setting the static IP Address
Enter the "NETWORK" item in the same way, Press the "Set"
key while the LCD displays "Local IP", and the phone will enter
the changing mode of the parameters. Press "set" key to make sure the
IP address which displayed on the screen;and Press the"Set"key
again to save the information after entering the right IP address, and
then quit the parameter setting mode and return to the current menu
（Local IP）by pressing the"cancel"key again according to the
prompt.Change the subnet IP which is under the"IP/Subnet"menu
and gateway IP items of the"Phone Setting" menu in the same
way.After setting the three items, press the"Cancel"key twice to
quit the setting menu, After restarting the unit successfully, the new
settings go into effect.
TCL communication
19
www.tclcomm.cn