Table of Contents
Advertisement
2.4.2 Codec Setting
Set up certain options which are applied to video and audio call. The options includes video switch,
video rate, DTMF, video encode and audio encode.
Operation for Audio Encode Setting:
Put the cursor on [Audio Encode]
and select "optional" →Press
press
Then you can check both disabled codecs and enabled codecs on the screen.
Enabled Audio Codecs:
Put the cursor on [Disabled Codecs], press
move the cursor on "→", press
You can continue the same operation to add more.
Disabled Audio Codecs:
Put the cursor on [Enabled Codecs], which needs deletion. Press
then press OK, and this codec will be deleted. Press to return.
You can continue the same operation to delete more.
NOTE: If you are not clear about the selection of video encode, you can choose "h263auto", and
audio encode you can choose "auto". The IP videophone will search for appropriate codecs
according to communication server to realize connection automatically.
2.4.3 Call Setting
In this mode, you can do the following setups - Auto Answer, Extended. Service, Call Bar, 3-way
Calling and Bit Rate.
Press
OK
to enter this interface
Press
to select certain item.
Press
OK
to do certain setting.
When you enter this interface, press
Press
to enter parameter setting field
Press numeric keys to input parameters
Press <BACK> to move to the previous menu.
2.4.3.1 Auto Answer
[Call Setting] → select [Auto Answer] → press
Press
to select "ON" if you want to use auto answer function.
Filling in seconds before the auto answer is activated.
Press
to select the answer ring, which can be your own recorded voice through the recorder
in [Add-In].
NOTE: If [ON/OFF] set "ON", the [Auto Answer] and [Answer Ring] will be active, the range of
auto answer time must be set [1-60].seconds.
2.4.3.2 Exten. Service
Extension Service includes Call Hold, Call Transfer, Call forward and Call waiting in busy mode,
and Forward Address Setting.
NOTE: If [Call Hold] set "OFF", the [Call Transfer] will be inactive. Only when [Busy mode]
OK
to enter
to select necessary codec, and press
OK
to add the codec, or press
to select type.
OK
- 10 -
to return.
and move the cursor on "←" ,
and
Advertisement
Table of Contents
