Device Setup; Insert The Sim Card; Insert The Battery - HTC PURE TOPA210 Quick Start Manual

Htc pure cell phone quickstart guide
Table of Contents

Advertisement

Device setup

Insert the SIM card

The SIM card contains your phone number,
service details, and phonebook/message
memory. Make sure that your device is turned
off before you remove the back cover.
1. Hold the device with both hands and the
front panel facing down.
. Push the back cover up with your thumbs
until it disengages from the device and
then slide it up to remove.
3. Locate the SIM card slot, then insert the
SIM card with its gold contacts facing down
and its cut-off corner facing out of the card
slot.
4. Slide the SIM card completely into the slot.
2
Note: To remove the SIM card, press down the
To remove the SIM card, press down the
tab in front of the SIM card slot opening
with one finger, and slide the SIM card
out from the slot with another finger.
6
3
Cut-off
corner

Insert the battery

Your device comes with a rechargeable
Lithium-ion or Lithium-ion polymer battery and
is designed to use only manufacturer-specified
original batteries and accessories.
1. Align the battery's
exposed copper
contacts with the
battery connectors
inside the battery
compartment.
. Insert the contact's side of the battery
first and then gently push the battery into
place.
3. Replace the back cover.
To remove the battery
1. Make sure your device is turned off.
. Remove the back cover.
3. The upper right side of the battery has
a notch. Lift the battery by the notch to
remove it.
Notch

Advertisement

Table of Contents
loading

This manual is also suitable for:

PurePure at&t

Table of Contents