Page 3
The information is provided “as is” without warranty of any kind and is subject to change without notice. HTC also reserves the right to revise the content of this document at any time without prior notice.
Page 4
Information, Stock Data, Data and/or Documentation will be error-free, or implied warranties arising from course of dealing or course of performance. Without limiting the foregoing, it is further understood that HTC and its Providers are not responsible for Your use or misuse of the Weather Information, Stock Data, Data and/or Documentation or the results from such use.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF...
Page 6
This product is equipped with a USB Cable for connecting with desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting this product to the computer. The power supply cord of a desktop or notebook computer has an equipment-grounding conductor and a grounding plug.
Page 7
• Take extra precautions • Keep the battery or device dry and away from water or any liquid as it may cause a short circuit. • Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation.
Page 8
Sound Pressure Level requirement laid down in the applicable NF EN 50- 1:000 and/or NF EN 50-:00 standards as required by French Article L. 5-1. • Earphone, manufactured by HTC, Model HS S00. SAFETY IN AIRCRAFT Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on...
Page 9
blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency.
Page 10
HEARING AIDS Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normal- use position to ensure the radiative performance and safety of the interference.
General Precautions • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen.
Page 12
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device.
Contents Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone ..............21 Accessories ..........................1 Top panel .............................1 Left panel ............................. Right panel .......................... Front panel .......................... Back panel ...........................4 Bottom panel..........................4 1.2 Installing the SIM Card, Battery, and Storage Card ........25 SIM card ............................5 Battery............................6 Storage card ..........................7...
Page 14
1.11 Using Finger Gestures ..................38 Finger scrolling ..........................8 Finger panning ..........................9 1.12 Connecting Your Device to a Computer ............40 Chapter 2 Using Phone Features 2.1 Making Calls ...................... 41 Making a call from the Phone screen ................41 Making a call from the TouchFLO D Home screen .............44 Making an emergency call ....................44 Making an international call ....................44 Calling voice mail ........................44...
Page 15
Internet ............................71 Calendar ............................7 Stock ..............................75 Photos and Videos ........................78 Music .............................79 Weather ............................8 Settings ............................84 Chapter 4 Entering Text 4.1 Selecting an Input Method................85 4.2 Using the Full QWERTY ..................86 4.3 Using the Phone Keypad .................. 88 4.4 Using Predictive Mode ..................
Page 16
Chapter 6 Exchanging Messages 6.1 Messaging .......................103 6.2 Text Messages ....................104 Creating and sending a new text message ..............104 Managing text messages ....................105 6.3 MMS .........................107 Changing the MMS settings ....................107 Creating and sending MMS messages ................108 Viewing and replying to MMS messages ..............
Page 17
7.3 Managing Meeting Requests .................129 7.4 Finding Contacts in the Company Directory..........130 Chapter 8 Internet 8.1 Ways of Connecting to the Internet ............... 131 Wi-Fi ............................11 GPRS/G ............................ 14 Dial-up ............................14 Starting a data connection ....................15 8.2 Using Opera Mobile™...
Page 18
Chapter 9 Bluetooth 9.1 Bluetooth Modes ....................157 9.2 Bluetooth Partnerships ..................158 9.3 Connecting a Bluetooth Hands-free or Stereo Headset ......159 9.4 Beaming Information Using Bluetooth ............160 Chapter 10 Navigating on the Road 10.1 Google™ Maps (Available by Country) ............163 Searching a place of interest .....................
Page 19
11.4 Using FM Radio ..................... 186 Saving presets ......................... 188 Minimizing or turning off FM Radio ................188 11.5 Using Audio Booster ..................189 Chapter 12 Programs 12.1 Managing Programs ..................191 Launching a program ......................191 Installing a program ......................191 12.2 Contacts ......................
Page 20
13.5 Using Comm Manager .................. 208 13.6 Using Task Manager ..................210 13.7 Protecting Your Device ................. 211 Protect your SIM card with a PIN ..................11 Protect your device with a password................11 Encrypt files on your storage card ................... 1 13.8 Managing Memory ..................
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone Accessories The product package includes: • • HTC Touch Diamond USB sync cable • • Battery Quick Start Guide • • AC adapter Getting Started and User Manual discs •...
Getting Started Left panel Right panel VOLUME UP Speaker During a call or when playing music, press this button to increase the volume. VOLUME DOWN During a call or when playing music, press this button to lower the volume. Stylus Tap items, write, or draw on the touch screen.
Getting Started Front panel Notification LED* Second Camera See description below. Use this camera for video call conversations or to Earpiece take a self-portrait. Listen to a phone Light Sensor call from here. Senses the ambient light and adjusts the screen Touch Screen backlight accordingly.
4 Getting Started Back panel Bottom panel 5.0 Megapixel Camera See “Taking Photos and Microphone Videos” in Chapter 11 for details. Sync Connector/Earphone Jack • Connect the supplied USB cable to synchronize information. Back Cover • Connect the power adapter to recharge the battery.
Getting Started 5 1.2 Installing the SIM Card, Battery, and Storage Card You need to remove the back cover before you can install the SIM card, battery, and storage card. Also, make sure to always turn off the power before installing or replacing the SIM card and battery.
6 Getting Started To remove the SIM card Remove the battery if it is installed. Press and hold the lock in the SIM card slot opening with your thumb. Slide the SIM card out from the slot with your other thumb or finger. Battery Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories.
Getting Started 7 To install the battery Align the battery’s exposed copper Notch contacts with the battery connectors at the bottom part of the battery compartment. Insert the contacts side of the battery first and then gently push the battery into place.
8 Getting Started 1.3 Charging the Battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. Note Only the AC adapter and USB sync cable provided with your device must be used to charge the device.
Getting Started 9 To turn off the device Press and hold the POWER button for a few seconds. Tap Yes when prompted. Auto configuring data connection settings and importing SIM contacts After installing customized settings, the SIM Card Changed screen appears. Follow the on-screen instructions to automatically configure your device’s data connections and/or import any contacts you have stored on your SIM card.
0 Getting Started 1.5 Home Screen The default home screen of the device is the TouchFLO™ D Home screen which allows finger-touch access to the most important functions such as contacts, text messages, e-mail, Internet, and more. For more information about using the TouchFLO D Home screen, see Chapter . Signal strength Connection status Volume status...
Getting Started 1 1.6 Notifications When you touch or tap the icon area of the title bar, the Notifications screen opens to display your connection status and lists all your pending notifications including missed calls, new SMS/MMS messages, and more. Touch an item on the Notifications screen to open the related screen or TouchFLO D tab.
Getting Started 1.7 Status Icons The following are some of the status icons that you may see on the device. Icons that appear in this area Icons that appear in this area Vibrate mode Battery charging Battery full Sound on Battery very low Sound off Icons that appear in this area...
Page 33
Getting Started Icons that appear in this area Icons that appear in this area GPRS available GPRS connecting EDGE available GPRS in use HSPA available EDGE connecting WCDMA/UMTS available EDGE in use Connected to a wireless HSPA connecting network HSPA in use Connection is active WCDMA/UMTS connecting...
34 Getting Started 1.8 Start Screen The Start screen, which can be opened by touching Start on the top-left corner of the screen or by pressing the START ( ) button, gives you one-touch access to all the programs and settings of your Windows Mobile-powered device. You can also add the shortcut icons of your favorite programs in the Start screen so you can open them quickly. Open the Start screen. Open the TouchFLO 3D People tab. Open the TouchFLO 3D Open the TouchFLO 3D Home tab. See “Home” in Calendar tab. Chapter 3 for details. Open ActiveSync. Open the TouchFLO 3D Settings tab and adjust the device settings. See “Settings” in Open the Chapter 3 for details. corresponding program. Swipe upward the screen to view or add more Add a program icon. program icons. Access all programs Remove a on your device. program icon. Note The Home, People, Calendar, Settings and ActiveSync icons are permanent icons and cannot be removed or replaced with other program icons.
Page 35
Getting Started 5 To add a program icon to the Start screen Touch an empty slot to open the Add Program screen that lists all programs on your device. Touch the program you want to add to the Start screen. When you have filled up the current Start screen with programs, scroll down the screen to access more empty slots and add more program icons.
6 Getting Started 1.9 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Touch this icon to open Customize Task Manager settings.
Getting Started 7 1.10 Adjusting the Volume A single volume control adjusts both the system volume (notifications and audio/ video playback volume) and the phone ring volume of your device. Press the VOLUME UP/DOWN button on the left panel of your device to open the Volume screen.
8 Getting Started 1.11 Using Finger Gestures You can use finger gestures to scroll and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on...
Getting Started 9 To scroll left and right • To scroll towards the right, swipe your finger to the left. To scroll towards the left, swipe your finger to the right. • To auto-scroll, flick your finger left or right. Touch the screen to stop scrolling. Finger panning You can use finger panning to move to and view other parts of a zoomed photo, web page,...
40 Getting Started 1.12 Connecting Your Device to a Computer Whenever you connect your device to the computer with the USB cable, the Connect to PC screen displays and prompts you to choose the type of USB connection: ActiveSync Select this mode when you need to do the following: •...
Chapter 2 Using Phone Features 2.1 Making Calls To make a call, you can either dial a number or select a contact you want to call. Note Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider.
Page 42
4 Using Phone Features For example, if you tap number “” on the phone keypad, which is associated with [a, b, and c] on the Phone keypad, contact names such as the following are considered matches: “Ben Miller”, “George Adams”, “John-Carter”, “Carter, Ellen”, “Dixon, Allan”, “Thomas_Clark”, “JaneCampbell”.
Page 43
Using Phone Features 4 Add the number to your contacts. Smart Dial panel Open the contact details. Tap to open or close the phone keypad. To call a number or contact, do one of the following: • Tap the desired phone number or contact from the list. •...
44 Using Phone Features Making a call from the TouchFLO 3D Home screen See “People” in Chapter for details. Making an emergency call Enter the international emergency number for your locale, and press the TALK/SEND button on your device. Additional emergency numbers may be included in your SIM card.
Using Phone Features 45 2.2 Answering and Ending Calls When you receive a phone call, the Incoming Voice Call screen will appear, allowing you to either answer or ignore the call. Accepting or rejecting an incoming voice call To answer a call Do any of the following: •...
46 Using Phone Features Using the call functions When a call is in progress, a shade covers the call function buttons to prevent accidental taps. Only the Keypad and End Call buttons are active. To access the call function buttons, touch the top of the shade and slide it down. The call function buttons allow you to put a call on hold, dial another contact for a phone conference, enter notes about the conversation, and more.
Page 47
Using Phone Features 47 To handle multiple calls Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers. Press the TALK/SEND button to accept the second call and put the first call on hold.
Page 48
48 Using Phone Features To use the speakerphone During a call, tap to turn the speakerphone on or off. The speakerphone icon ) appears in the title bar when the speakerphone is on. You can also press and hold the TALK/SEND button during a call to turn the speakerphone on or off.
Using Phone Features 49 2.3 Using Call History The missed call icon icon appears in the title bar when you missed a call. Use the Call History tab to check who the caller was, or view all your dialed numbers, and received calls.
50 Using Phone Features 2.4 Speed Dial Use Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can tap and hold the number 2 key on the Phone screen keypad to dial the contact’s number. To create a Speed Dial entry On the Phone screen, tap Menu >...
Using Phone Features 51 Notes • The signal strength may influence the quality of streaming images. • The speakerphone automatically turns on when a video call is established. • If the video call is unsuccessful, a message pops up asking you if you want to try again, make a voice call instead, or send an SMS/MMS message.
Page 52
5 Using Phone Features To change the video call options On the Phone screen, or on the screen of the ongoing video call, tap Menu > Video Call Options and set the following: General tab • Show still image. Select the image you want to display to the other party when you turn off the camera.
Using Phone Features 5 Services tab To set up further calling options for Video Call, tap the Services tab. Accepting or rejecting an incoming video call When you receive a video call, the Incoming Video Call screen appears. Refer to the “Accepting or rejecting an incoming voice call”...
54 Using Phone Features 2.7 Using Car Kit Phones Bluetooth car kit phones that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download device and/or SIM contacts from your device to the car kit phone, and use the car kit phone to answer and make calls.
Chapter 3 TouchFLO™ 3D 3.1 About TouchFLO™ 3D TouchFLO™ 3D gives you touch control over your Windows Mobile-powered device. TouchFLO D provides a Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, and Internet. 3.2 Using the TouchFLO 3D Home Screen The TouchFLO D Home screen have the following tabs: Home...
Page 56
56 TouchFLO™ D To switch between the tabs of the Home screen Do any of the following: • Touch or tap the desired tab. • Press and hold your finger on the active tab, and then slide your finger right or left over the tabs.
TouchFLO™ D 57 To move or hide a TouchFLO 3D Home screen tab On the Home screen, slide your finger to the Settings tab, and then touch Customize Tabs. To move a tab, touch and hold the icon before the tab name, and then drag it up or down the tabs list.
Page 58
58 TouchFLO™ D To view the date and time in other cities On the Home tab, tap the clock to open the World Clock tab ( ) and view the date and time in up to ten cities. By default, the cities that are listed on the World Clock tab are the same cities listed on the Weather tab.
Page 59
TouchFLO™ D 59 The Select City screen then appears. Flick your finger on the screen or use the Quick Scroll bar on the right of the screen to scroll through the city list. Touch the desired city to set your time zone. You can also slowly scroll through the country or city list by dragging your finger upward on the screen, or enter the country or city name in the search box.
60 TouchFLO™ D People On the People tab, you can set up My Contact Card, add favorite contacts, and quickly make calls or send text and e-mail messages to these contacts. From the People tab, you can also view all exchanged text and e-mail messages with a contact.
Page 61
TouchFLO™ D 61 To add favorite contacts On the People tab, touch one of the plus (+) icons, or touch Add Favorite. On the Select a Contact screen, touch the name of the desired contact. To create a new contact, touch New on top of the list.
Page 62
6 TouchFLO™ D To find a favorite contact Do any of the following: • To flip through the contact pictures one at a time, swipe your finger upward or downward the screen. • On the picture strip at the right side of the People tab: •...
Page 63
TouchFLO™ D 6 To communicate with your favorite contact After selecting a favorite contact, do any of the following to communicate with that contact: • Touch the contact’s name, phone number, or e-mail address below the contact picture to call or send an e-mail message. For more information about making a call or composing and sending an e-mail message, refer to Chapter and Chapter 6.
Page 64
64 TouchFLO™ D To open and use the Contact Details screen When you touch the picture of the contact in the center of the People tab or touch the contact name in the Contacts tab of the People screen, the Contact Details screen opens.
Page 65
TouchFLO™ D 65 To open and use the People screen Touch All People on the People tab to display the People screen. Use the People screen to quickly view all your contacts, select a contact as favorite, and more. The People screen has these tabs: Contacts, Favorites, and Call History.
Page 66
66 TouchFLO™ D To view and search contacts on your device On the People screen, touch the Contacts tab to view all your contacts. Swipe upward on the screen to display more contacts. You can also use the search box or the Quick Scroll bar to search for contacts on your device.
Page 67
TouchFLO™ D 67 To create a new contact On the People screen, touch the Contacts tab, and then touch New at the top of the contacts list. Add the desired contact information, and then tap OK. Add a contact photo. You can select a photo in Album or open Camera and take a photo of the...
68 TouchFLO™ D Messages On the Messages tab, you can read text messages (SMS) as they arrive, and create a new text message. Touch the message to Create a new text message. open the Messages tab of the Contact Details screen and view all received messages from To flip through received text...
Page 69
TouchFLO™ D 69 Enter your e-mail address and password, then tap Next. Enter your name and the account display name, then tap Next. Mail Setup then searches for the e-mail provider settings on your device. If the settings are not found on your device, you will be prompted to enter the e-mail account settings manually.
Page 70
70 TouchFLO™ D Clear the data that you want to exclude from synchronization, and then tap Done. Your device synchronizes with the Exchange Server and downloads your Outlook e-mail messages. Note If you include all Outlook data, your Outlook contacts, appointments, and tasks will also synchronize with your device.
TouchFLO™ D 71 Internet On the Internet tab, you can open Opera Mobile™ to browse the web, search information, and add push web pages. This tab also lets you enable Push Internet to update the contents of your push web pages before you browse them. Enter the information you want to search on the web, and tap...
Page 72
7 TouchFLO™ D To automatically update your push web pages Automatically update your push web pages to ensure that you browse the latest versions of your favorite web sites every time you access them from the Internet tab. The updated web sites are cached in the device memory so that they load faster in Opera Mobile.
TouchFLO™ D 7 Calendar The Calendar tab displays a monthly calendar and allows you to quickly create and view appointments. Indicates that you have appointments To go to the next for that date. or previous month, swipe your finger Today’s date. upward/downward or touch the Up/Down Touch a date to view or...
Page 74
74 TouchFLO™ D To view and manage your appointments On the Calendar tab, dates with appointments are indicated by a triangle ( ) at the upper-left corner of the date box. Touch a date on the calendar to switch to day view. The screen displays all your appointments and the weather information for that day.
TouchFLO™ D 75 Stock The Stock tab allows you to add, view, and analyze stocks and stock market movements using updated financial information. You can add up to 14 stock quotes or stock market indexes on the Stock tab. Note Depending on your data download settings, you can set the device to automatically connect to the Internet via the G/GPRS data connection to download stock or stock market information every time you select the Stock tab.
Page 76
76 TouchFLO™ D Search the company or stock market. Enter the company/stock Add the stock/stock market name or market to the Stock tab. ticker symbol. Swipe upward to scroll down the Return to the screen and access Stock tab. more search results. Tap the company name, stock market index, or ticker symbol to display it on the Stock tab.
Page 77
TouchFLO™ D 77 Touch the stock quote or stock market index name to view its intraday chart and other details. Touch to open the Stock Details screen. Shows the last time you updated the information. To view more stock quotes or stock market indexes, swipe your finger upward on the screen.
78 TouchFLO™ D Photos and Videos The Photos and Videos tab lets you flip through your photos and video clips and view them in full screen. From this tab, you can also open Camera and capture pictures and record videos. Capture a photo.
TouchFLO™ D 79 Tips • For more information about viewing in full screen, see “Viewing photos” and “Playing videos” in Chapter 11. The file formats that can be viewed on the Photos and Videos tab are the same as in Album. •...
Page 80
80 TouchFLO™ D To play music On the Music tab, flip through albums and tracks to find the music you want to start listening to, and then touch the Play icon. To move forward or backward in the current music track Touch and hold on the thin bar below the album art to display the progress bar: Drag your finger right or left on the progress bar to move forward or backward in the current track.
Page 81
TouchFLO™ D 81 Note When you select a category in the Library such as Artists and play its music, the Now Playing list will be replaced with the music tracks from that category. To create and use a playlist Select the desired music on the Music tab or the Library to play it. On the Music tab, touch Menu >...
8 TouchFLO™ D Weather The Weather tab shows you the current weather as well as weather information for the next four days of the week. The Weather tab can display weather information of your local city and/or weather in up to ten cities. Shows the last weather update.
Page 83
TouchFLO™ D 8 The Select City screen then appears. Flick your finger on the screen or use the Quick Scroll bar on the right of the screen to scroll through the city list. Touch the desired city to select it. You can also slowly scroll through the country or city list by dragging your finger upward on the screen, or enter the country or city name in the search box.
84 TouchFLO™ D Settings The Settings tab gives you access to all the device settings. Adjust the Wi-Fi, and Bluetooth settings. Swipe your finger Access all personal, upward/downward system, and on the screen to view connection settings. more settings. Open ActiveSync and sync Outlook information. See Chapter 7 for details. Adjust the audio settings and sound profile.
Chapter 4 Entering Text 4.1 Selecting an Input Method When you start a program or select a field that requires text or numbers, the Input Panel opens and the Input Panel icon is displayed on the menu bar. Tap the Input Selector arrow (next to the Input Panel icon) to open a menu where you can select a text input method and customize input options.
86 Entering Text 4.2 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Note The keyboard layout may vary according to the region or country. • Tap to enter letters or symbols.
Page 87
Entering Text 87 As you tap the keys, the activated character displays on top of the key. Activated character Key when tapped. To learn how to enter text using Predictive mode, see “Using Predictive Mode” in this chapter. To enter accented characters Tap and hold a key with accent options (for example, vowels) to display the accented characters bar.
88 Entering Text When you have selected the character, release your finger to enter it. You can also use the Numeric and Symbol mode to enter accented characters. For more information, see “Using Numeric and Symbol Mode” in this chapter for details.
Entering Text 89 To enter text using the Phone Keypad Start a program that accepts text input, such as Word Mobile. Tap the Input Selector arrow, then tap Phone Keypad. When in multitap mode ( ), enter a character by tapping a key until the desired character is displayed on the screen.
Page 90
90 Entering Text To add a word to the XT9 dictionary If the word that you have entered is not found in the dictionary, you can add it to the dictionary. While in Predictive mode, type a letter and then tap on right side of the word candidate list.
Entering Text 91 4.5 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, and special characters. To switch to Numeric and Symbol mode While using Full QWERTY or Phone Keypad, tap Locate and tap the desired number or symbol to enter it.
9 Entering Text 4.6 Adjusting Touch Input Settings You can set the device to play a sound or vibrate when you tap a Full QWERTY or Phone Keypad key. Tap the Input Selector arrow, then tap Touch Input Settings. On the Options tab, select or clear the options according to your preference. Tap OK.
Chapter 5 Synchronizing Information 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing it to your device. The following types of information can be synchronized between your computer and your device: • Microsoft® Office Outlook® information — Office Outlook e-mail, contacts, calendar, tasks, and notes •...
94 Synchronizing Information After installing the synchronization software on your computer, connect the device to your computer using the USB sync cable. When the Connect to PC screen appears on your device, touch ActiveSync, and then touch Done. You can also synchronize information with your computer using Bluetooth. See “Synchronizing via Bluetooth”...
Page 95
Synchronizing Information 95 On the license agreement screen, click Accept. On the Windows Mobile Device Center’s Home screen, click Set up your device. Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not synchronize Outlook information.
96 Synchronizing Information Using Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronization settings.
Synchronizing Information 97 5.3 Setting Up ActiveSync® on Windows® XP The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx.
98 Synchronizing Information When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mail messages and other information appear on your device after synchronization. 5.4 Synchronizing With Your Computer Connect and synchronize your device with your computer using the USB cable or Bluetooth connection.
Synchronizing Information 99 Selecting information to synchronize You can select the information types and the amount of information to synchronize for each type either on your device or your computer. Follow the steps below to change synchronization settings on your device. Note Before changing synchronization settings on your device, disconnect it from your computer.
100 Synchronizing Information Troubleshooting sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favor of the Internet or network connection. If this happens, tap Start > Settings, and then tap All Settings. Tap Connections tab >...
Synchronizing Information 101 5.6 Synchronizing Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronize music and video with your device. Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media®...
Chapter 6 Exchanging Messages 6.1 Messaging Messaging is a central location where you can find all types of messaging accounts, which include text messages (SMS) and e-mail accounts. To select a messaging account Do one of the following: • Tap Start > All Programs > Messaging. The Account Picker screen then opens and you can select an account.
104 Exchanging Messages To automatically add a signature in outgoing messages You can automatically add your name and other information as your signature in outgoing SMS and e-mail messages: Note You need to specify your signature for each type of messaging account. Tap Start >...
Exchanging Messages 105 Enter your message. Tips • To choose from preset messages, tap Menu > My Text and tap a desired message. • To check the spelling, tap Menu > Spell Check. When finished, tap Send. Note If you want to know when a text message is received, before sending the message that you are composing, tap Menu >...
Page 106
106 Exchanging Messages At the bottom of the screen, type your reply message and then tap Send. • Open the Contact Open the link in Details screen. Opera Mobile. • If the sender is not in your contacts, tap the mobile phone Enter your reply number to call the message here.
Exchanging Messages 107 To delete all messages in a thread In the SMS / MMS inbox, tap and hold a message, and then tap Delete. 6.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message.
108 Exchanging Messages Tap the Servers tab and check if your device is preset with MMS server settings. If there are no preset settings, tap New and enter the MMS settings which you obtained from your wireless service provider. Note If your device already has preset MMS settings, it is recommended that you do not...
Page 109
Exchanging Messages 109 Note If you prefer to start composing from a blank MMS message every time, select the Always choose custom check box. In To, enter the recipient’s phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts. Note You may need to scroll up to see the Cc and Bcc fields.
Page 110
110 Exchanging Messages To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text. You can insert the following types of information: Enter your own text Insert contact Choose from common words information...
Exchanging Messages 111 • to quit selection and return to your MMS message. Note To record a new audio clip and add it to your MMS message, tap . The Record pop- up window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add.
11 Exchanging Messages To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. When you receive a new MMS message, open and view the message. To avoid receiving MMS messages from this sender next time, tap Menu >...
Exchanging Messages 11 Synchronizing Outlook e-mail with your computer If you have installed the synchronization software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook e-mail. If you have not yet installed the synchronization software nor created a partnership, do so by following the procedures in Chapter 5.
Page 114
114 Exchanging Messages Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen.
Page 115
Exchanging Messages 115 To customize download and format settings Before you tap Finish when setting up your POP or IMAP4 e-mail account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings. Options Description Automatic Send/Receive...
116 Exchanging Messages Creating and sending an e-mail message After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. On the TouchFLO D Home screen, slide to the Mail tab. Select the e-mail account you want to use on the right side of the screen.
Exchanging Messages 117 Viewing and replying to e-mail messages To view an e-mail message On the TouchFLO D Home screen, slide to the Mail tab, select the e-mail account, and then tap Inbox. Tap an e-mail to open it. • Open the Contact Details screen.
Page 118
118 Exchanging Messages • Tap Menu > Download Message. Notes • The Fetch Mail feature, which is available for POP and IMAP4 Internet e-mail accounts, downloads an entire e-mail without the need for you to perform a full synchronization. This limits the download to just the e-mail message that you want and helps save data cost.
Exchanging Messages 119 Notes • You can receive and view HTML e-mail messages from any type of e-mail account. The HTML format is retained, without layout shifting or resizing. HTML e-mail support in Outlook Mobile is available only if you are synchronizing your device with Microsoft Exchange Server 007.
10 Exchanging Messages Synchronizing e-mail messages Synchronizing e-mail messages ensures that new e-mail messages are downloaded to the device Inbox folder, e-mail messages in the Outbox folder are sent, and e-mail messages deleted from the server are removed from your device. The manner in which you synchronize e-mail messages depends on the type of e-mail account you have.
Page 121
Exchanging Messages 11 To change the download size and format for Internet e-mail Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. Tap your POP or IMAP4 Internet e-mail account. Tap Download Size Settings.
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mail messages and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronize with your company’s Exchange Server.
14 Working With Company E-mails and Meeting Appointments Clear the Try to get e-mail settings automatically from the Internet option and tap Next. In Your e-mail provider, select Exchange server and tap Next. Tap Next again. Select the Attempt to detect Exchange Server Settings automatically option and tap Next.
Working With Company E-mails and Meeting Appointments 15 To manually start synchronization, tap Start > Settings, and then touch Sync Data. Note If you connect your device to your office computer via a USB or Bluetooth connection, you can use this connection to the computer to “pass through” to the network and download Outlook e-mail messages and other information to your device.
16 Working With Company E-mails and Meeting Appointments To turn on Direct Push in Comm Manager Tap Start > Settings, and then touch Communications. You can also tap Start > All Programs > Comm Manager. On the Comm Manager screen, touch the OFF/ON slider at the right side of the Microsoft Direct Push item.
Working With Company E-mails and Meeting Appointments 17 By default, only the first few words of the message are shown. To download the whole e-mail, finger-scroll to the end of the message, then tap Get the rest of this message. Wait for the remainder of the message body to download.
18 Working With Company E-mails and Meeting Appointments Flagging your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device.
Working With Company E-mails and Meeting Appointments 19 To send out-of-office auto-reply messages Tap Start > All Programs > Messaging > Outlook E-mail. Tap Menu > Tools > Out of Office. In the I am currently list, select Out of the Office.
10 Working With Company E-mails and Meeting Appointments 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send e-mail messages and meeting requests to anyone in your company.
Chapter 8 Chapter 8 Internet Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network through Wi-Fi, GPRS/G (or EDGE when available), or dial-up. You can also add and set up a VPN or proxy connection. Wi-Fi Wi-Fi provides wireless Internet access over distances of up to 100 meters (00 feet).
Page 132
1 Internet Indicates that your device is connected to this Wi-Fi network Indicates a secured Wi-Fi network. Signal strength Network name (SSID) Tap Back to return to the Communications screen. Next time you use your device to detect Wi-Fi networks, you will not be prompted to enter the network key of the previously accessed Wi-Fi network (unless you perform a hard reset which will erase custom settings on your device).
Page 133
Internet 1 To check Wi-Fi network status Aside from the Wi-Fi status icon on the title bar, you can check the current Wi-Fi connection status from any of the following screens of your device: • Wireless LAN screen Tap Advanced on the Wi-Fi screen. On the Main tab, you will see the Wi-Fi network that your device is currently connected to.
14 Internet To save battery power while connected to a Wi-Fi network Using Wi-Fi quickly consumes battery power. Turn off Wi-Fi when not in use. You can also enable power saving settings while using Wi-Fi. Tap Start > Settings, and then tap Menu > Wireless Networks > Power Mode tab.
Internet 15 In My ISP, tap Add a new modem connection. In the Select a modem list, select Cellular Line, then tap Next. Enter the ISP server phone number, then tap Next. Enter your user name, password, and any other information required by your ISP, then tap Finish.
16 Internet 8.2 Using Opera Mobile™ Opera Mobile™ is a full-featured Internet browser, optimized for use on your device. To open Opera Mobile and go to a website On the Home screen, slide to the Internet tab and then tap Launch Browser. On the Opera Mobile screen, tap the address bar.
Internet 17 Return to the previous web page viewed. Go to the Bookmarks screen where you can add, edit, or send bookmarks. Add a new browsing tab or switch to another browsing tab. Go to the home page. Open a list where you can change Opera Mobile settings. See “Opera Mobile menu”...
Page 138
18 Internet Navigating web pages To pan on the web page While browsing web pages, use finger gestures to pan on the web page. Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Favorite, and more.
Internet 19 To change the screen orientation Change the screen orientation by simply turning your device sideways. 8.3 Using YouTube™ YouTube™ lets you browse, search, and watch Internet videos that are posted in YouTube. Note You need an active data or Wi-Fi connection to use YouTube. If you are using a GPRS/G connection, watching Internet videos may significantly increase your data connection costs.
140 Internet Set the quality of Open the downloaded videos and Program Guide. site (country) preference. Close YouTube. Displays the current program channel Filter the list by feed being viewed. type and by date uploaded to the YouTube server. Displays the available videos for the selected program channel.
Page 141
Internet 141 To add a new channel Search the channel or video you want to add to the Program Guide. See “Searching videos” for details. In the search results list, tap the right side of the video or channel to open the details screen. , and then tap OK on the confirmation screen.
14 Internet Watching videos Tap a video on any YouTube screen, program guide channel, or search results list to launch the YouTube Video Player. Drag to go forward or backward in the video. Download progress Buffered video Go back to the Depending on the beginning of the video.
Internet 14 Bookmarks You can save your favorite videos in Bookmarks for quick access. To save a video in Bookmarks After watching a video, tap . You can also on any video that you want to add to Bookmarks and then tap on the video details screen.
144 Internet 8.4 Using Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files.
Page 145
Internet 145 Streaming Media then automatically opens and starts playing the file. During playback, use the slider and button controls to play/pause, switch to full screen, replay, and fast forward. Tap to toggle between playing Drag the slider to go or pausing the backward or forward video playback.
146 Internet To view streaming video information While streaming a video clip, tap Menu > Properties to view the video properties such as the video link or location, duration, and bit rate. To configure streaming video connection settings Tap Menu > Options to configure the Streaming Media settings. From this screen, you can set the media buffer, select the connection to use, and set all streaming videos to play in full screen.
Internet 147 Choose what information you want to sync online with your device. If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live™ contacts will be added to the contact list and to Windows Live™ Messenger on your device.
148 Internet Using Windows Live™ Messenger With this mobile version of Windows Live™ Messenger, you can send and receive instant messages. To sign in to Windows Live™ Messenger and start a conversation Tap Messenger on the Windows Live™ screen. Tap Sign in on the Messenger screen. Signing in may take several minutes, depending on your connection speed.
Internet 149 To add a Windows Live™ contact You can add new Windows Live™ contacts in Windows Live™ Messenger. Tap Menu > Add new contact. Enter the e-mail address of the contact, and then tap OK. 8.6 Using RSS Hub RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the Internet.
Page 150
150 Internet Select the checkboxes of the RSS channels you want to subscribe to, then tap Finish. Category Channels Tap to load pre-selected RSS channels. Channels are grouped by categories. If you want to select all channels in a category, select the category check box.
Page 151
Internet 151 The channel list appears. Tap Refresh to update the channels. Select the channel category Channel is to display updated. Tap to view the headlines. Channel list Headline count Cancel channel Update the updating channels To add new channels In the channel list, tap Menu >...
15 Internet Using the headline list Tap a channel in the channel list to display the headline list. Tap a headline to open the news summary The item contains screen. a keyword. Play back the podcast or view the image. New or unread item Podcast or image attachment is...
Internet 15 Viewing the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and Podcast or image read status attachment. Tap the link to download the file. News summary Open the complete article in Opera Mobile.
154 Internet To send the a link to the article via e-mail In the news summary screen, tap Menu > Send Link via Email. Messaging opens and displays the Account Picker screen. Tap the e-mail account that you want to use. A new e-mail message is then created with the link.
Page 155
Internet 155 To set up your device as a USB modem Connect the device to your desktop or notebook computer using the USB sync cable. When the Connect to PC screen appears, select Internet Sharing, then tap Done. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
Page 156
156 Internet For Windows Vista: a. Click Start > Control Panel > Network and Internet > Network and Sharing Center. b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection. c. In the Bluetooth Personal Area Network Devices dialog box, select your device, and click Connect.
Chapter 9 Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters without requiring a physical connection. Bluetooth on your device operates in three different modes: •...
158 Bluetooth To turn off Bluetooth visibility after a certain period of time You can automatically turn off Bluetooth visibility after a specified period of time. Tap Start > Settings, and then tap Menu > Bluetooth Devices > Timeout tab. In Turn off Visible mode, select the time before your device’s Bluetooth visibility turns off, and then tap OK.
Bluetooth 159 To accept a Bluetooth partnership Ensure that Bluetooth is turned on and in visible mode. Tap Yes when prompted to establish a partnership with the other device. Enter the passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection.
160 Bluetooth Tap the name of the Bluetooth headset in the list to automatically pair it with your device. Note If automatic pairing fails, manually enter the headset passcode when prompted. If the Bluetooth stereo headset is disconnected, turn the stereo headset on, repeat steps 1 and , and then tap the stereo headset name under the Previously Paired Headsets section to connect.
Page 161
Bluetooth 161 c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see “Bluetooth partnerships”. d. In the Options tab of Bluetooth Devices, select Show the Bluetooth icon in the notification area. e. To enable your computer to receive Bluetooth beams, right-click the Bluetooth icon in the notification area at the bottom-right corner of your computer screen and select Receive a File.
Chapter 10 Navigating on the Road 10.1 Google™ Maps (Available by Country) Google™ Maps lets you track your current location, view real-time traffic situations, and receive detailed directions to your destination. It also allows you to search and locate places of interest or even a contact address. Note You need an active data or Wi-Fi connection to use Google Maps.
164 Navigating on the Road Notes • Traffic information is available only in some selected cities. • Tap Menu > Help > Tips to learn more about the program and its many features. Searching a place of interest Google Maps lets you search and locate a place of interest, shows the contact information for that place, and gives directions on how to get there from your current location.
Navigating on the Road 165 On the Address tab, tap: • The [phone number] to call the place of interest. • The web address (if available) to go to the web site of the place of interest. • Directions to here to get directions going to the place of interest from your current location, or tap Directions from here to get directions going to another location from the place of interest.
Page 166
166 Navigating on the Road • Do not leave your device in a vehicle or expose the device to direct sunlight to avoid overheating the battery, which could pose damage to the device or risk to the vehicle. • When using the device inside a vehicle, use the car holder to mount the device securely in place.
Navigating on the Road 167 • The Global Positioning System (GPS) is built and operated by the US Defense Department. The Department is responsible for the accuracy and maintenance of the system. Any changes that the Department makes may affect the accuracy and function of the GPS system. 10.3 Downloading Location Data via QuickGPS Before using the device for GPS navigation, open QuickGPS to download ephemeris data (current satellite position and timing information).
168 Navigating on the Road Changing the download options To configure download options, tap Menu > Options and choose from available options: • Remind me when data expires. Display a message when ephemeris data expires. • Auto download when data expires. Automatically download ephemeris data when it expires.
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. To open the Camera screen On the Home screen, slide to the Photos and Videos tab and then tap the camera icon ( ).
170 Experiencing Multimedia Icon Capture Mode Captures still images continuously in one direction, and then stitches them to create a panoramic view of a scenery. Records video clips suitable for sending via MMS. Captures a still image that you can assign as a contact picture. Captures still images and places them within frames.
Experiencing Multimedia 171 To use Touch Focus: Set the Camera to Photo or Contacts Picture mode. Touch the area on the screen that you want to focus. The Touch Focus indicator ( ) positions itself on the selected area. Note If you tap outside the effective focus area, a white box appears to indicate the area where you can use Touch Focus.
17 Experiencing Multimedia The Review screen After capturing a photo or recording video, the Review screen gives you the option to view/play, send, or delete the photo or video clip. Icon Function Return to the live Camera screen. View the captured image or play the captured video in Album. See “Viewing Photos and Videos Using Album”...
Experiencing Multimedia 17 Touch Focus / Auto-focus indicator. See “Using the focus” for details. Menu. Open the Menu Panel. See “Menu Panel” for details. Virtual Camera button. Activates the auto-focus and functions as the shutter release button. Template Selector icon. In Picture Theme mode, tap to select another frame. Progress indicator.
174 Experiencing Multimedia Zooming Before capturing a photo or a video clip, you can zoom in or out on your subject. To zoom in or out, slide your finger up or down on the Zoom bar while holding the device sideways. While you are sliding your finger on the Zoom bar, the level of zoom is shown on the zoom control bar on the screen.
Experiencing Multimedia 175 Capture mode Resolution Zoom range Video 640 x 480* 1.0x to 1.6x 5 x 88 1.0x to 1.6x 0 x 40 1.0x to 1.6x 176 x 144 1.0x to 1.6x 18 x 96 1.0x to 1.6x MMS Video 176 x 144 1.0x to 1.6x 18 x 96...
Page 176
176 Experiencing Multimedia • Resolution. Select the resolution to use. • Widescreen (Photo mode). When On (default) you can use the entire screen as viewfinder. Refer to the zoom table for the resolution when Widescreen is On. • Touch Focus (Photo and Contacts Picture modes). Enables or disables the Touch Focus function.
Page 177
Experiencing Multimedia 177 • Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before capturing. • Prefix. The file name of a newly captured photo or video is set to “IMAGE” or “VIDEO”...
178 Experiencing Multimedia 11.2 Viewing Photos and Videos Using Album Use Album to view photos and videos in your device. To open Album On the Home screen, slide to the Photos and Videos tab, and then tap Album. You can also tap while on the Camera program to open Album.
Experiencing Multimedia 179 Viewing photos While viewing a photo, tap the screen to open the menu. Send the photo using Save the photo as a contact e-mail or MMS. picture, save the onscreen image as a new file, and more. Start the slideshow.
Page 180
180 Experiencing Multimedia To view a slideshow of photos in the current album While viewing a photo, tap the screen, and then tap Note Animated GIF and video files are excluded from the slideshow. During the slideshow, tap the screen to show the playback controls. Set the transition effect, time per slide, and orientation of...
Experiencing Multimedia 181 Playing videos While playing back video, tap the screen to show the playback controls. Drag to go forward or backward in the video. Total duration Elapsed time Change the video display mode to Fit Go back to the &...
18 Experiencing Multimedia 11.3 Using Windows Media® Player Mobile Windows Media® Player Mobile plays digital audio and video files that are stored on your device or on the web. To open Windows Media® Player Mobile Tap Start > All Programs > Windows Media. Windows Media®...
Experiencing Multimedia 18 The playback screen opens and plays the audio or video file. Drag to jump to any part of the video or audio. Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file. the current file or to the Play/Pause previous file.
Page 184
184 Experiencing Multimedia Note If you have previously opened Windows Media® Player and searched for media on your computer, you are not prompted to search your computer in step . On the Device Setup dialog box, enter a name for your device and click Finish.
Experiencing Multimedia 185 Playlists and Library List Content List Sync List Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your computer to synchronize media files to your device. •...
186 Experiencing Multimedia Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list. Repeat this step until you have added all desired media files to the Now Playing list. Note You cannot select multiple files simultaneously.
Page 187
Experiencing Multimedia 187 FM Radio status Select mono or stereo audio. FM radio frequency Search the FM band for the next higher FM station. Search the FM band for the next lower FM station. Fine tune the radio frequency by +0.1 MHz. Fine tune the radio frequency by -0.1 MHz.
188 Experiencing Multimedia Saving presets Save favorite FM stations as presets so you can easily access them. You can save up to 0 preset radio stations. Radio stations that are saved on Presets 1 to 6 can be accessed on the FM Radio screen. To save FM stations as presets Tune in to the desired FM frequency, and then tap Presets.
Experiencing Multimedia 189 11.5 Using Audio Booster Audio Booster optimizes sound by providing an audio equalizer for a better listening experience. To use Audio Booster, connect the supplied wired headset to your device. To open Audio Booster Tap Start > All Programs > Audio Booster. Enable or disable the equalizer.
Chapter 12 Programs 12.1 Managing Programs Launching a program Tap Start > All Programs, and then tap a desired program. To view more programs, scroll down the screen by swiping your finger upward. See “Start Screen” in Chapter 1 for details. Installing a program You can install or uninstall additional programs, such as the programs in the Application disc or purchased programs.
19 Programs Connect your device to the computer. Double-click the installation setup file. To uninstall a program Tap Start > Settings, and then tap All Settings. On the System tab, tap Remove Programs. In the Programs in storage memory list, select the program you want to remove, and then tap Remove.
Programs 19 In the File as field, choose how you want the contact name to appear in the contact list. To add a photo of the contact, tap Select a picture, and then select the picture file or tap Camera to take a photo of the contact. To assign a ring tone to the contact, tap the Ring tone field, scroll through the list of tones, then select a desired tone.
194 Programs Select a preset category such as Business or Personal, or tap New to create your own category. When finished, tap OK. To find a contact on your device There are several ways to find a contact when your contact list is long: •...
Programs 195 To beam the contact information Tap and hold a contact on the Contacts screen. Tap Send Contact > Beam, then select the device where to send the contact. Note Before beaming, make sure Bluetooth is turned on and set to visible mode on your device and the target mobile device.
196 Programs To install from your device You can copy MIDlets/MIDlet suites from your PC to your device using the USB sync cable or Bluetooth connection. On the JBlend screen, tap Install > Local Install. The program then searches for MIDlets/MIDlet suites on your device and displays them in a list. From the list, tap the MIDlet/MIDlet suite that you want to install.
Programs 197 12.4 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office OneNote® Mobile lets you create notes with text, photos, and voice recordings for synchronization later with Microsoft®...
198 Programs 12.5 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card Tap Start >...
Chapter 13 Managing Your Device 13.1 Copying and Managing Files Copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync Connect your device to the computer.
00 Managing Your Device To manage files on your device using File Explorer File Explorer lets you browse and manage the contents of your device. The root folder on the device is named My Device, and contains the following folders: My Documents, Program Files, Windows, and more.
Managing Your Device 01 Personal tab Icon Description Buttons Assign a program or function to a hardware button or set the function you want to execute (for instance, lock the device) when you press and hold the END button. Input Set options for each of the input methods. Lock Set a password for your device.
0 Managing Your Device System tab Icon Description About This is where you can see basic information such as the Windows Mobile® version and type of processor used on your device. You can also specify a name for your device. Auto Volume Control Automatically adjust the recording volume to an even level.
Page 203
Managing Your Device 0 Icon Description G-Sensor Recalibrate the G-Sensor of the device. Use this function when auto-rotate is not working properly. Managed Programs Displays the programs that were installed on your device using System Center Mobile Device Manager. Memory Check the device memory allocation and storage card information. Power Check the remaining battery power.
04 Managing Your Device Connections tab Icon Description Advanced Network Turn HSPA on/off, set the GPRS authentication method, and set the line type to use when making a circuit switch data (CSD) connection. HSPA is a .5G digital data service that provides high-speed downstream/upstream data rates.
Managing Your Device 05 13.3 Changing Basic Settings Display settings To manually adjust the screen brightness By default, your device automatically adjusts the screen brightness according to the ambient lighting. Tap Start > Settings, and then tap All Settings. On the System tab, tap Power > Backlight tab. Clear the Auto adjust backlight check box.
06 Managing Your Device Device name The device name is used to identify your device when synchronizing with a computer, connecting to a network, or restoring information from a backup. Note If you synchronize multiple devices with the same computer, each device must have a unique name.
Managing Your Device 07 To choose how to be notified about events or actions Tap Start > Settings, and then tap Sound > Advanced. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes. On the Notifications tab, in Event, tap a ring type and ring tone for that event or action from the lists below.
08 Managing Your Device 13.4 Using Connection Setup After you insert a new SIM card and power on your device, you can use Connection Setup to automatically configure your device’s data connections, such as G/GPRS and WAP. Note For details on how to automatically configure the data connections, see “Importing SIM contacts and auto configuring data connection settings”...
Page 209
Managing Your Device 09 Switch Airplane Mode on or off. Switch the phone on or off. See “Turning the Phone Function On See “Turning the Phone Function On and Off” in Chapter . and Off” in Chapter . Access the phone settings and Switch Bluetooth on or off.
10 Managing Your Device 13.6 Using Task Manager Task Manager lets you view and stop running programs, configure the button, and enable the Quick Menu on the Home screen. To open Task Manager Tap the Quick Menu button on the top-right corner of the Home screen to open the Quick Menu, and then tap To configure the Exit ( ) button...
Managing Your Device 11 13.7 Protecting Your Device Protect your SIM card with a PIN You can protect your SIM card by requiring a PIN (personal identification number) every time the device is turned on. You will not be able to use the phone or the data connection until you enter the correct PIN.
1 Managing Your Device Notes • To ensure that you can always make emergency calls, do not begin your password with the digits of your local emergency number. • If you entered a hint, the hint will be displayed after the wrong password is entered five times.
Managing Your Device 1 13.8 Managing Memory To see the available device memory Tap Start > Settings, and then tap All Settings. On the System tab, tap Memory > Main tab. The amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory.
14 Managing Your Device Performing a hard reset If a normal reset does not solve a system problem, you can perform a hard (full) reset. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it on. You will lose any programs you installed, data you entered, and settings you customized on your device, and only Windows Mobile®...
Managing Your Device 15 Using Clear Storage If you can access the device settings, you can use Clear Storage to reset your device back to factory default settings. Tap Start > Settings, and then tap All Settings. On the System tab, tap Clear Storage. Enter “1234”...
Page 216
16 Managing Your Device To change Windows Update options Tap Start > Settings, and then tap All Settings. On the System tab, tap Windows Update. Tap Menu > Connections to change how the device connects to the Internet when checking for updates, or tap Menu > Change Schedule to change how Windows Update checks for Windows Mobile®...
Appendix A.1 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of TOPA100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your TOPA100. The Battery Pack has been assigned a model number of TOPA160. Note This product is intended for use with a certified Class Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Page 218
18 Appendix • ETSI EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the .4 GHz ISM band and using spread spectrum modulation techniques. • EN 300 440-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices;...
Page 219
Appendix 19 • ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for .4 GHz wideband transmission systems. • ETSI EN 301 908-1 & -2 Electromagnetic compatibility and Radio spectrum Matters (ERM);...
0 Appendix • EN 55020:2007 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 0:006) This equipment may be operated in: Safety Precautions for RF Exposure Use only original manufacturer-approved accessories, or accessories that do not contain any metal.
Appendix 1 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 • Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.
Appendix Telecommunications & Internet Association (TIA) Safety Information Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
Appendix The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste.
Bluetooth® .0 with Enhanced Data Rate and ADP for wireless stereo headsets • Wi-Fi®: IEEE 80.11b/g • HTC ExtUSB™ (11-pin mini-USB .0 and audio jack in one) Camera Main camera: 5.0 megapixel color camera with auto focus Second camera: VGA CMOS color camera Audio supported...
Page 225
Appendix 5 Battery • Rechargeable Lithium-ion battery • Capacity: 1100 mAh • Talk time: Up to 00 minutes for WCDMA Up to 40 minutes for GSM • Standby time: Up to 500 hours for WCDMA Up to 60 hours for GSM •...
Index Basic settings 05 Battery ADP 159 - battery information 6 ActiveSync - charge battery 8 - ActiveSync mode 40 - install 7 - set up 97 - remove 7 - synchronize with computer 98 - save battery power 14 - synchronize with Exchange Server 1 Beam via Bluetooth 160 Add and remove programs 191...
Page 228
8 Index - Menu Panel 17 - synchronize e-mails 10 - zooming 174 - web feeds 149 Car kit phones 54 Clear Storage 15 Clock & Alarms 0 E-mail Comm Manager 04, 08 - Internet e-mail account (POP/ Company Directory 10 IMAP4) 11 Conference call 47 - mail server settings 114...
Page 229
Index 9 G-Sensor 0 Library Google Maps 16 - Music tab (Home screen) 80 GPS 165, 167 Live Messenger 148 Hard reset 14 Mail tab (Home screen) 68 Home screen 0, 55 Meeting request 19 Memory 6, 1, 4 Messages tab (Home screen) 68 Messaging IMAP4 11 - about 10...
Page 230
0 Index Multimedia 107, 169 Music tab (Home screen) 79 QuickGPS 167 Quick menu 6, 10 News channels (web feeds) 149 Now Playing Regional Settings 0 - Music tab (Home screen) 79, 80 Regulatory notices 17 Reply - e-mail 118 Office Mobile 197 - MMS 111 OneNote Mobile 197...
Page 231
Index 1 - Beam 04 - TouchFLO 0 - Bluetooth 04 - Windows Update 0, 15 - Connections 14, 04 Settings tab (Home screen) 84 - Connection Setup 04, 08 SIM card - Domain Enroll 04 - install 5 - USB to PC 100, 04 - PIN 11 - Wi-Fi 04 - remove 6...
Page 232
Index Synchronize - make video call 50 - ActiveSync 98 - settings 51 - change information types 99 Video capture mode 169 - music and videos 101 Voice call - via Bluetooth 100 - about 41 - Windows Media Player 18 - answer call 45 - Windows Mobile Device Center 94 - end call 48...
Need help?
Do you have a question about the 99HEH104-00 - Touch Smartphone - GSM and is the answer not in the manual?
Questions and answers