Gonogo Test - Nokia N71 Service Manual

CMO Operations & Logistics
Training & Vendor Development
Multimedia Creation & Support
18.

GONOGO TEST

To test the Camera, Bluetooth and IRDA functionality refer to the N71 User`s guide.
Before starting the
GoNoGo test, check that
camera window is clean.
If not, clean the window
with cloth.
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than 5m
from each other.
Infrared test
You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
receiver device.
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Reference unit, Bluetooth /infrared activated
Service Manual N71 RM-67/RM-112
The User´s Guide is available on
Page 34 (35)
CONFIDENTIAL
www.nokia.com.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Test unit
Approved 4.0
MGR
12.Dec.2006