Nokia N71 Service Manual page 27

CMO Operations & Logistics
Training & Vendor Development
Multimedia Creation & Support
41. Place the LR LID PWB onto the LID CENTER FRAME and check
the position of the CAMERA MAIN ASSY.
43. Close the LCD connector.
45. Fit the SHIELD LID ASSY into the LID CENTER FRAME. Take spe-
cial care to the grounding springs.
47. To prevent damaging the plastic threads, turn the screws
slightly left first. Then tighten them in the shown order with a
torque setting of 17Ncm.
Service Manual N71 RM-67/RM-112
Page 27 (35)
CONFIDENTIAL
42. Fit the LCD into its place.
44. Remove the protective film.
46. Close all snaps.
48. Close the LCD connector.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
12.Dec.2006