Table of Contents
Advertisement
Cabling
Using four twisted-pair, Category 5e cabling for copper port connection. The cable
between the converter and the link partner (switch, hub, workstation, etc.) must be
less than 100 meters (328 ft.) long.
Fiber segment using single-mode connector type must use 9/125 μm
single-mode fiber cable. You can connect two devices in the distance of 10
Kilometers in full duplex operation. For half-duplex operation, the recommended
maximum distance is 412 meters (1,352 ft.)
Fiber segment using multi-mode connector type must use 50 or 62.5/125 um
multi-mode fiber cable. You can connect two devices up to 550m distances.
11
Advertisement
Table of Contents
