Advertisement
operatioN
Charging the Battery
The battery provides power for eight hours. To recharge the battery, plug the USB cable into the
DC jack on the headset and connect it to your PC. NOTE: Before the first use of the headset,
charge the battery fully for 10 hours. Thereafter, recharging takes approximately 90 minutes.
Turning the Headset On / Controls
To turn the headset on, press and hold the Power button
(about 3 seconds) until the LED lights blue. To turn it off,
press and hold the Power button (about 3 seconds) until
the Power LED turns off.
Power Button/LED:
• Solid blue: Power is on.
• Flashing blue: Connected to another device.
• Solid red: The battery is charging. (The red LED turns off when the battery is charged.)
• Flashing red: The battery is low. Recharge before the LED turns off.
Volume +/–: Toggle to raise/lower the volume incrementally.
Stop/Play: Press to stop/mute; press again to play/resume. (Button is between volume controls.)
Back/Next: Slide to go back or move forward on a connected song track list.
Power
button/
LED
Volume
+/–
Stop/Play
Microphone
DC
jack
Back/
Next
3
Advertisement
