Thank you for purchasing the MANHATTAN Bluetooth Headset, ® Model 176866. This lightweight and powerful hands-free mobile communications solution connects to most Bluetooth-enabled mobile phones so you can manage hands-free calls conveniently and safely. No special software or drivers are necessary, so following the simple instructions...
• Use only the included USB cable to charge the headset. charging the Battery The MANHATTAN Bluetooth Headset features a built-in lithium-ion battery that you need to fully charge (3 hours) prior to initial use. During the charging process, the red LED indicator will remain lit.
battery charges take approximately one hour (or until the red LED turns off). To charge the battery, plug the USB cable into the charging port of the headset and connect it to your computer via a USB port. After charging is complete (the red LED turns off), remove the cable from the device and the computer.
Page 5
Pairing with Your Cell Phone or Other Bluetooth Devices 1. With the MANHATTAN Bluetooth Headset turned off, press and hold Button 1 until the red and blue LEDs flash alternately to indicate the headset is in pairing mode.
Answering or Ending Calls When the headset is paired with your cell phone and you receive a call, a musical tone will sound. Press Button 1 to answer the call. To end a call, press Button 1 again. NOTE: Due to varying cell phone designs, a disconnect may occur even with the headset still turned on;...
beep indicates the mute function is in effect. To undo the mute function, press both buttons simultaneously again. Rejecting a Call During a call, press Button 1 for 3 seconds to reject an incoming call. trouBleshooting • A flashing red LED indicates a low battery. Charge as instructed. •...