Voice.command - HTC Dash 3G HS S200 User Manual

176 Using Other Applications
To make a call or launch a program using Speed Dial
If you have assigned a speed dial key to a contact or a program in Speed Dial, do
the following to dial the contact's number or open the associated program:
• Press and hold the assigned key, if it is a single-digit speed dial number.
•
To dial a two-digit speed dial number, press the first number key first, and
then press and hold the second number key.
To delete a speed dial entry
1. On the Home screen, select Start > Applications > Speed Dial.
2. Select the desired entry and select Menu > Delete.
11.4 Voice Command
Voice Command lets you call your contacts, open applications, play back music,
and get calendar information just by using your voice. Voice Command only
responds to a set of predefined commands. You cannot create your custom
commands in Voice Command.
Pressing and holding the SHORTCUT KEY (
Voice Command is activated, the
screen.
To call a contact
1.
Hold the phone a few inches away from your mouth.
2.
Press and hold the SHORTCUT KEY to activate Voice Command.
3.
In a clear voice, say "Call [Contact Name]. "
4.
Voice Command will confirm with you the contact you want to call. After the
Voice Command confirmation, say "Yes" or "Correct. "
Note
5.
The phone calls the contact.
If Voice Command is wrong about the contact to call, say "No" or "Incorrect" to
try again.
) activates Voice Command. When
icon will appear at the upper-right corner of the