Arming Away: Setting The Alarm When Leaving - Gemini GEM-DXK1 KEYPAD Operating Manual

A R M I N G AW A Y : S E T T I N G T H E AL A R M W H E N L E AV I N G
S YS TEM RE AD Y
E X I T T I M E 0 6 0
P L E A S E L E A V E N O W
CAN'T ARM S YS TEM
ZONE S F AUL TED
Z O N E S F A U L T E D
0 2 B A C K D O O R
B Y P A S S E D
BYPASSED
0 2 B A C K D O O R
BYPASSED
6
Arming the System
1
Check the keypad. The green STATUS light must be on in order to arm. If the
green light is off, "ZONES FAULTED" will display in the window followed by the
number and description of each faulted zone.
secure it by closing a window, door, etc. When all zones are secure, the green
STATUS light will come on and the window will display "SYSTEM READY".
2
Arm the system. Enter your code and press
Z O N E S F A U L T E D
will go off, the red ARMED light will come on and the window will display "EXIT
TIME XXX", "PLEASE LEAVE NOW" (where "XXX" represents the exit time
remaining, in 10-second steps). Note: If you enter a wrong code, the keypad will
0 2 B A C K D O O R
display "INVALID ENTRY, TRY AGAIN".
3
Leave the premises. Leave through the exit door before exit time expires.
Priority Arming B Y P A S S E D
B Y PA SS ED
If you attempt to arm with a faulted Zone, a 3-second tone will sound at the keypad.
"CAN'T ARM SYSTEM" and "ZONES FAULTED", will display in the window,
indicating that the faulted zone(s) must be secured before the panel can be armed.
B Y PA SS ED 0 2 B A C K D O O R
Selectively Bypassing Zones
If you cannot locate or repair the problem yourself, call for assistance. If you cannot
get immediate help, bypass the problem zone(s) from the system by pressing
then the zone number (or vice versa).
Note: Bypassed zones are unprotected. If armed with zones bypassed, be sure to
have the system checked as soon as possible
Note each problem zone and
. The green STATUS light
Q
,
B