Setting The Date And Time - Gemini GEM-DXK1 KEYPAD Operating Manual

Programming the system Date and Time.
The User Program Mode may also be used to set the system Date and Time which display on the keypad.
A C T I V A T E
P R O G R A M
E N T E R D A T E
0 0 / 0 0 / 0 0
E N T E R D A T E
0 7 / 2 9 / 0 0
E N T E R T I M E
E N T E R T I M E
26
P R O G R AM M I N G ( O P T I O N A L )
Enter the User Program Mode
1.
Enter your User Code, then press
Y / N
2.
Answer NO (
press YES (
3.
"ENTER USER CODE" will display, press NEXT (
displays the "Enter Date" screen.
Programming the Date
1.
At the Enter Date screen, simply punch in the correct date using the numeric
keypad buttons.
2.
Press
Programming the Time
After entering in the Date, press NEXT (
( 1 2 : 0 0 A )
1.
At the Enter Time screen, simply punch in the correct time using the numeric
keypad buttons and if necessary, press any numeric button to change the AM
display to PM (or vice versa).
( 0 6 : 3 0 P )
2.
Press
) until "ACTIVATE PROGRAM Y/N" is displayed , then
Q
).
P
For example, for July 29, 2000, enter:
U
to save the Date.
For example, for 6:30 PM, enter:
U
to save the Time.
to enter the Function Mode.
R
) until the keypad
P
07 29 00
) for the Time Entry screen.
P
06 30
( )
if necessary
0