Table of Contents
Advertisement
Operating Your Camera
The name will appear at the top left hand
corner.
Please find the position you wish to display the
name by using the 4 directional buttons, and
then press the SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
☞
DAY&NIGHT (ICR TYPE) : Select from COLOR, B/W or AUTO modes.
• AUTO : According to the input luminance level, IR Cut Filter is automatically
switched to the appropriate mode for daytime or night-time. The
COLOR mode is operated for daytime, and it converts to BW mode for
night-time
• COLOR : COLOR mode
• B/W
: BW mode. Please press SETUP button to
turn on or off the burst signal on BW
mode.
Notes
• I f AGC is OFF, you can't select AUTO mode and B/W mode.
When DayNight mode is set to Auto under the condition which the strong IR light is
flickering periodically, a malfunction of IR-Cut filter may occur.
24
COLOR IR CAMERA
FRONT DOOR
FRONT DOOR
User's Manual
MOTION DETECTION :
☞
This product has a feature that allows you to observe movements of objects in 4 different areas on the
screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a
single individual can conduct supervision efficiently. The camera detects an object's movement by
sensing disparity of outline, and level of brightness and color.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
• Please select the area you wish to observe from
the 3 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button.
• Please press the SETUP button to save the changes and complete the setting.
Notes
• There is no 'MD' output signal. 'MD' is on screen display only words.
PRIVACY : Mask privacy area you do not wish to appear on the screen.
☞
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• Please select the area you do not wish to appear
from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or RIGHT button.
☞
COM ADJ :
When wish to control CAMERA by external
communication control device, it is function that set up
CAMERA's communication states and protocol.
• CAM ID
: Assign ID number to the camera. It is
restricted available to set ID from 1~255
• DISP CAMID : Displays CAM ID on the top left of the screen.
• BAUD RATE : Configure baud rate from 9600bps, 19200bps, 38400bps, 57600bps.
• UART MODE : Configure parity bit to NONE,EVEN, or ODD. Data bit is set to
8bit and stop bit to 1bit.
• END
25
COLOR IR CAMERA
User's Manual
Advertisement
Table of Contents
