Table of Contents
Advertisement
Operating Your Camera
Notes
• The maximum storage magnification in low light level can be adjusted by pressing
the SETUP button in 'AUTO' mode.(X2~X128)
• As the magnification increases, the screen gets brighter; moving object gets more afterimage.
• If storage magnification is increased while SENS UP is operating, it may cause
noise, and spots may appear; however this is normal.
SPECIAL
1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using
the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the UP or DOWN button.
SPECIAL
▶ 10. CAMERA ID
11.DAYNIGHT
12.MOTION DET
13.PRIVACY
14.COMM ADJ
15.IMAGE ADJ
16.IRMODE ↵
17.RESET
18.RETURN ↵
☞
CAMERA ID : If the ID is input, the camera ID appears on the monitor.
1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN button.
2) Please select 'ON' by pressing the LEFT or RIGHT button.
3) Please press the SETUP button.
Notes
• If 'OFF' is selected, the ID does not appear
on the monitor even if it has been input.
22
COLOR IR CAMERA
OFF
AUTO
OFF
OFF
↵
↵
SPECIAL
▶ 10.CAMERA ID
OFF
11.DAYNIGHT
AUTO
User's Manual
4) Up to 15 letters can be used for the ID.
Please move the cursor to the letter you wish to choose by using the UP and DOWN button.
Camera ID
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- .
1 2 3 4 5 6 7 8 9
←→ CLR POS END
Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the UP, DOWN, LEFT and RIGHT buttons.
Please lock in the letters by using the SETUP button.
• When the letter is locked in, the cursor moves to the next space.
Please repeat the above to input the ID.
Notes
• If the wrong name has been input.....
If you press the SETUP button after moving the cursor to CLR, all the letters will be erased. If
you want to correct a letter, please move the cursor to the arrow at the bottom left of the
screen and press 'SET'. Please position the cursor above the letter you wish to correct, and
then move the cursor onto the letter you wish to choose and press the SETUP button.
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
Camera ID
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- .
1 2 3 4 5 6 7 8 9
←→ CLR POS END
COLOR IR CAMERA
23
User's Manual
Advertisement
Table of Contents
