Long Leg - oklahoma joes 11201716 Product Manual

3
With unit still in position from previous steps, insert long legs over
leg sockets closest to the floor. Next insert two 3/8-16x2" Hex-
head Bolts into the bolt holes, followed by two 3/8" Lock
Washers and two 3/8-16 Nuts. Repeat for other leg. Do not fully
tighten the nuts at this time.

Long Leg

4
Attach short legs to remaining leg sockets near firebox. Next insert
two 3/8-16x2" hex-head bolts into the bolt holes, and secure with two
3/8" Lock Washers and two 3/8-16 Nuts. Do not fully tighten the nuts
at this time..
NOTE: Axle bushing should
be to the outside
Page 8
3/8-16x2"
hex head bolts
3/8" Lock Washers
Short Leg
Leg Socket
3/8-16 Nuts
3/8-16 Nuts
3/8" Lock
Washers
3/8-16x2"
hex head bolts