oklahoma joes 11201716 Product Manual page 10

Insert a Hitch Pin into
7
the hole at one end of
an axle rod. Hold
handle between
handle brackets on
smoke chamber door
and slide rod through
brackets and handle.
Insert another Hitch Pin
at opposite end of
handle rod.
Repeat
these steps to
assemble handle to
firebox door.
8
Place a 1/4" flat washer onto a 1/4-20x3/4" hex-head bolt. Insert the bolt through the center hole in the firebox side door. Slide
the butterfly damper onto the bolt so that the damper handle will be on the outside when door is closed. Slide another 1/4" flat
washer onto the bolt, then a 1/4-20 lock nut. Do not fully tighten. Damper must be able to rotate freely.
1/4-20 lock nut
Page 10
Hitch pin
Axle Rod
1/4" flat washer
Handle
bracket
Handle
Butterfly
damper
Handle
bracket
Hitch pin
1/4"-20x3/4"
hex head bolt
1/4" flat washer