Table of Contents
Advertisement
Power* on/off
If you start from the Time of day display, repeat steps 1-5.
6.
Scroll up or down until Power is displayed.
7.
Press OK to start setting the Power Output. On/OFF starts to flash.
8.
Scroll up or down to set Power Output on or off. Press OK.
OFF: Skip the rest of the Power Output settings.
9.
C. weight is displayed. Scroll up or down to adjust the chain weight. Press OK.
10. C. length is displayed. Scroll up or down to adjust the chain length.
Press OK.
11. S. length is displayed. Scroll up or down to adjust the span length.
Press OK.
If you are using the wireless Polar Speed Sensor, set the Power off.
For more detailed information, see the Polar Power Output™ manual.
Autostart on/off (AutoStrt)
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until AutoStrt is displayed.
7. Press OK to start setting the autostart. On/OFF starts to flash.
8. Scroll up or down to set the autostart on or off. Press OK.
Autostart means that the receiver automatically starts or stops the exercise
recording, as you start or stop moving your bicycle. To continue your settings,
press the stop button or to return to the Time of day display, press and hold the
stop button.
B 37
Advertisement
Table of Contents
