Asus P2B-N User Manual page 113

G. Network Interface G. Network Interface
The network interface or adapter stopped working when another network in-
terface or adapter was added to the computer.
• Make sure the cable is connected to the motherboard's network interface or RJ45
port.
• Make sure your PCI BIOS is current.
• Make sure the other network interface or adapter supports shared interrupts. Also,
make sure your operating system supports shared interrupts — OS/2* doesn't.
The interface stopped working without apparent cause.
• Try reconnecting the cable to the RJ45 port first.
• The network driver files may be corrupt or deleted. Delete and then reinstall the
drivers.
• Try another motherboard of the same model.
• Run the diagnostics.
The Wake On LAN feature is not working.
• Make sure the WOL cable is attached and power is applied to the computer.
• Check the BIOS for its WOL setting. Some computers may need to be configured
to WOL.
• Make sure the network cable is fully attached to the network interface or adapter.
Link LED does not light when power is connected.
• Make sure WOL cable is attached and power is applied to computer.
• Make sure network cable is attached at both ends.