Entering Copy Mode
Before making copies, make sure that
Copy key
press the
Loading Original Documents to Copy
1
Position the document to be
copied.
For details on positioning
the document, refer to
"Placing a Document on
the Flatbed Glass" on page
34 and "Loading a Docu-
ment into the ADF" on
page 35.
If you are using the flatbed
glass to scan, do not load
any documents into the
ADF.
2
Customize the copy settings by using the control panel keys. Refer to
"Setting Copy Options" on page 51. To cancel settings, press the Stop/
Reset key.
3
Press the Start key to begin copying.
If multiple copies are printed with the ADF, the memory may become
full and only one copy may be printed, depending on the selected copy
settings. When making copies with multiple copy settings selected,
such as the image type and the Collate function, copy each set individ-
ually.
50
Copy key
to enter Copy mode. Copy mode is the default setting.
is lit in green. Otherwise,
Entering Copy Mode