EMC Avamar 6.1 User Manual page 85

11. Click Browse.
The Select Virtual Machine dialog box appears.
Note: Only virtual machines that are powered off can be selected from the list; all
others are disabled. You are also prevented from selecting the original virtual
machine.
12. Select the destination virtual machine and click OK.
The Select Virtual Machine dialog box closes.
13. Switch to Configure Virtual Machine dialog box and click OK.
The Configure Virtual Machine dialog box closes.
14. Switch to Restore Options dialog box.
15. Select one of the following encryption methods for client/server data transfer during
this restore:
• High — Strongest available encryption setting for that specific client platform.
• Medium — Medium strength encryption.
• None — No encryption.
Note: The exact encryption technology and bit strength used for any given
client/server connection is dependent on a number of factors, including the client
platform and Avamar server version. The
additional information.
16. Click More Options.
The Restore Command Line Options dialog box appears.
17. Select or clear Use changed block tracking to increase performance.
18. Select one of the following settings in the Select Post Restore Options list:
• Do not power on VM after restore.
• Power on VM with NICs enabled.
• Power on VM with NICs disabled.
19. (Optional) To include plug-in options with this restore, configure the settings.
Options" on page 99
Restoring the full image or selected drives to a different (existing) virtual machine
EMC Avamar Product Security Guide
provides detailed information.
Restore
provides
"Plug-in
85