Page 1
Avamar 6.1 for VMware ® ® User Guide P/N 300-013-353 REV 07...
Page 2
2012 EMC Corporation. All rights reserved. Published in the USA. Published December, 2012 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose.
Groups and group behavior..............60 Adding a vCenter group ................. 62 Editing a vCenter group ................. 65 Editing proxy datastore and group settings..........66 VMware Image Dataset................68 Best practices ..................... 69 Troubleshooting..................70 EMC Avamar 6.1 for VMware User Guide...
Page 4
How to set plug-in options ................ 100 Linux VMware Image plug-in options ............100 Windows VMware Image plug-in options ........... 101 Linux VMware File-level Restore plug-in options ........101 Windows VMware File-level Restore plug-in options........101 Index EMC Avamar 6.1 for VMware User Guide...
Page 5
....................98 Linux VMware image backup options ................ 100 Linux VMware image restore options ................. 100 Windows VMware image backup options ..............101 Windows VMware image restore options ..............101 EMC Avamar 6.1 for VMware User Guide...
Page 6
Tableses EMC Avamar 6.1 for VMware User Guide...
PREFACE As part of an effort to improve its product lines, EMC periodically releases revisions of its software, and hardware. Therefore, some functions described in this document might not be supported by all versions of the software, or hardware currently in use. The product release notes provide the most up-to-date information on product features.
“File-level restore limitations” on page 79 Updated to note that symbolic links cannot be restored or browsed. April 25, 2012 First release of Avamar 6.1. Related documentation The following EMC publications provide additional information: EMC Avamar Compatibility and Interoperability Matrix ◆...
Page 9
EMC Avamar for SQL Server User Guide ◆ Conventions used in this document EMC uses the following conventions for special notices: DANGER indicates a hazardous situation which, if not avoided, will result in death, or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death, or serious injury.
Preface Typographical conventions EMC uses the following type style conventions in this document: Normal Used in running (nonprocedural) text for: • Names of interface elements, such as names of windows, dialog boxes, buttons, fields, and menus • Names of resources, attributes, pools, Boolean expressions, buttons,...
Page 11
6. Click the search button. Live chat To engage EMC Customer Service by using live interactive chat, click Join Live Chat on the Service Center panel of the Avamar support page. Service Requests For in-depth help from EMC Customer Service, submit a service request by clicking Create Service Requests on the Service Center panel of the Avamar support page.
Page 12
Please include the following information: Product name and version ◆ Document name, part number, and revision (for example, 01) ◆ Page numbers ◆ Other details that will help us address the documentation issue ◆ EMC Avamar 6.1 for VMware User Guide...
Page 13
CHAPTER 1 Introduction This chapter discusses the following: Avamar for VMware image backup and restore ............14 ◆ Guest backup and restore ..................15 ◆ Choosing a data protection method ................ 16 ◆ Changed block tracking................... 18 ◆ Additional VMware resources .................. 18 ◆...
Selective restore of individual folders and files to Microsoft Windows and Linux virtual ◆ machines Proxies run Avamar software inside a Linux virtual machine, and are deployed using an appliance template (.ova) file. EMC Avamar 6.1 for VMware User Guide...
• SCO Open Server and UnixWare • Sun Solaris IBM DB2 databases hosted on IBM AIX, Red Hat EMC Avamar for IBM DB2 User Guide and SUSE Linux, and Microsoft Windows EMC Avamar for Lotus Domino User Guide Lotus Domino databases...
Avamar for VMware image backup and restore: Can leverage vCenter to discover virtual machines, and add them to the Avamar server ◆ in batches Requires moderate amount of initial setup and configuration ◆ EMC Avamar 6.1 for VMware User Guide...
Page 17
Introduction Efficiency Guest backup and restore: Offers highest level of data deduplication efficiency ◆ Backups do not consume ESX server CPU, RAM, and disk resources ◆ Backups consume small amounts of guest virtual machine CPU, RAM, and disk ◆ resources when backups are occurring Avamar for VMware Image backup and restore: Moderate deduplication efficiency ◆...
Introduction to VMware vSphere ◆ Getting Started with ESX ◆ ESX, and vCenter Server Installation Guide ◆ Basic System Administration ◆ vSphere Web Access Administrator's Guide ◆ ESX Configuration Guide ◆ Resource Management Guide ◆ EMC Avamar 6.1 for VMware User Guide...
CHAPTER 2 Configuration and Setup This chapter provides essential configuration and setup procedures for both vCenter and Avamar environments that must be performed before Avamar for VMware image backup and restore can be used to protect virtual machine data. Topics in this chapter include: Task road map ......................
Configuration and Setup Enable support for multiple vCenters Avamar for VMware image backup and restore supports protecting up to 5 vCenters from a single Avamar server. Beginning with Avamar 6.0, support for multiple vCenters is enabled by default during new Avamar server software installations. However, if your Avamar server was upgraded to from the previous version, you might need to perform the following manual configuration in order to enable support for multiple vCenters.
5. Page down until the Windows for x86 (32 bit) section is visible. 6. Click the Microsoft Windows XP, 2003, Vista, 2008, 7 link. The Downloads for Microsoft Windows XP, 2003, Vista, 2008, 7 page appears. 7. Click the AvamarConsoleMultiple install package. EMC Avamar 6.1 for VMware User Guide...
Page 23
Configuration and Setup Your browser might prompt you to either open the file “in-place” (on the server) or save it to your local computer. Either method is acceptable. However, if you save the file to your local computer, you must open (double-click) that installation file to continue with this procedure.
• Other Windows versions: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\SSL\rui.crt • Linux: /etc/vmware-vpx/ssl/rui.crt 5. Create a temporary version of the MCS keystore by copying the live keystore to /tmp by typing: cp /usr/local/avamar/lib/rmi_ssl_keystore /tmp/ EMC Avamar 6.1 for VMware User Guide...
Configuration and Setup 6. Add the default vCenter certificate to the temporary MCS keystore file by typing: cd /tmp $JAVA_HOME/bin/keytool –import –file rui.crt -alias ALIAS -keystore rmi_ssl_keystore where ALIAS is a user-defined name for this certificate, which can often be the file name.
Configuration and Setup Create dedicated vCenter user account EMC strongly recommends that you set up a separate vCenter user account that is strictly dedicated for use with Avamar. Use of a generic user account such as “Administrator” might hamper future troubleshooting efforts because it might not be clear which “Administrator”...
Page 27
Configuration and Setup Table 3 Minimum required vCenter user account privileges (page 2 of 2) Setting Minimum required privileges Virtual machine > Configuration • Add existing disk • Add new disk • Add or Remove device • Advanced • Change CPU count •...
The Administration window appears. 2. Click the Account Management tab. 3. In the tree, select the top-level (root) domain. 4. Select Actions > Account Management > New Client… The New Client dialog box appears. EMC Avamar 6.1 for VMware User Guide...
Configuration and Setup 5. For Client Type, select VMware vCenter. 6. Complete the following settings: Table 4 New vCenter client settings Setting Description New Client Name or IP Fully-qualified DNS name, or IP address of the vCenter. Port vCenter web services listener port. Default setting is port 443. User Name vCenter user account name you previously created.
IP address to each proxy. vCenter performs a reverse DNS lookup of that IP address to ensure that it is resolvable to a hostname. For best results, configure all required DNS entries for proxies you plan to deploy before proceeding with the remainder of this procedure. EMC Avamar 6.1 for VMware User Guide...
5. Page down until the VMware vSphere section is visible. 6. Click the EMC Avamar VMware Image Backup/FLR Appliance link. The Downloads for EMC Avamar VMware Image Backup Appliance page appears. 7. Click the AvamarCombinedProxy-linux-sles11_64-VERSION.ova link. where VERSION is the specific version Avamar software you are installing.
Select the appliance template file and click Open. The Open dialog box closes. The full path to the appliance template file appears in the Deploy from file field. e. Click Next. The OVF Template Details screen appears. EMC Avamar 6.1 for VMware User Guide...
Page 33
Configuration and Setup 5. In the OVF Template Details screen, complete the following: a. Ensure that the template information is correct. b. Click Next. The Name and Location screen appears. 6. In the Name and Location screen, complete the following: Deploy proxy clients...
Page 34
– The DNS name assigned to the proxy virtual machine. – The Avamar client name after the proxy registers and activates with server. In order to avoid confusion and potential problems, EMC strongly recommends that you consistently use the same fully-qualified hostname for this proxy in all contexts.
Page 35
Configuration and Setup 8. In the Specific Host screen, complete the following: a. Select a specific ESX server from the Host Name list. b. Click Next. The Storage screen appears. 9. In the Storage screen, complete the following: Deploy proxy clients...
Page 36
The Disk Format screen appears. 10. In the Disk Format screen, complete the following: a. Accept the suggested default setting for Available Space (GB). b. Accept the suggested default provisioning setting (Thin Provision). c. Click Next. EMC Avamar 6.1 for VMware User Guide...
Page 37
Configuration and Setup The Network Mapping screen appears. 11. In the Network Mapping screen, complete the following: a. Select a destination network from list. b. Click Next. The networking Properties screen appears. Deploy proxy clients...
If not using DHCP, enter one or more Domain Name Server (DNS) hostnames or IP addresses. Separate multiple entries with commas. Network IP Address If not using DHCP, enter a valid routable IP address on your network. Network Netmask Set to 255.255.255.0. EMC Avamar 6.1 for VMware User Guide...
Page 39
Configuration and Setup a. Click Next. The Ready To Complete screen appears. b. Ensure that the information is correct. c. Click Finish. The Deploy OVF Template wizard closes. 13. Wait for the deployment operation to complete. This might take several minutes. A confirmation message appears.
For best results, always register and activate proxies from the client during deployment as described in steps 5—8. Using the alternative method of inviting the proxy client to register with the Avamar server from Avamar Administrator is known to have unpredictable results. EMC Avamar 6.1 for VMware User Guide...
Page 41
Configuration and Setup 5. Register the proxy with an Avamar server by typing 1. The following appears in the console window: Enter the Administrator server address (DNS text name, or numeric IP address, DNS name preferred): 6. Type the actual network hostname as defined in DNS of the Avamar server from which you want to initiate, and manage backups and restores.
Avamar Administrator. 3. In the tree, select the proxy you registered in the “Configure proxy virtual machine network settings in vCenter” on page 40 and select Actions > Account Management > Client Edit… EMC Avamar 6.1 for VMware User Guide...
Configuration and Setup The Edit Client dialog box appears. 4. Click the Datastores tab, then select all vCenter datastores that host virtual machines you want to protect with this proxy. 5. Click the Groups tab, then assign this proxy to one, or more existing groups by selecting the Select checkbox next to each group.
Configuration and Setup Upgrading Avamar proxy software Perform the following procedure when a newer version of the Avamar 6.1 proxy software is available for download from the Avamar server. This procedure cannot be used to upgrade an Avamar 6.0 proxy. Instead, use the upgrade EMC Avamar 6.0 for VMware Guide...
Page 45
Configuration and Setup 13. In the Resources pane, select a datastore in the Datastore list. This datastore is where you will upload the ISO file. Note: If you are performing multiple upgrades, you should select a datastore that is accessible to the greatest number of proxies. 14.
Page 46
31. In the left pane, locate and select the proxy you just upgraded. 32. Right click Edit Settings. The Virtual Machine Properties dialog box appears. 33. In the Hardware list, select CD/DVD Drive 1. EMC Avamar 6.1 for VMware User Guide...
Configuration and Setup 34. In Device Status, clear the Connected option. 35. Click OK. The Virtual Machine Properties dialog box closes. 36. Repeat steps 21–35 to upgrade additional proxies. Protecting virtual machines with both guest and image backup You can protect a virtual machine using both guest backup and image backup. For example, a daily guest backup to frequently protect selective files, and an infrequent or on-demand full image backup protects the full machine.
Page 48
Configuration and Setup EMC Avamar 6.1 for VMware User Guide...
CHAPTER 3 Administration This chapter provides instructions for administering an operational Avamar for VMware image backup and restore environment. Topics in this chapter include: Basic client administration..................50 ◆ Groups and policy management................60 ◆ Best practices ......................69 ◆ Troubleshooting......................
“Deploy proxy appliance in vCenter” on page 32. For example, the example vCenter proxy hostname avamar-proxy “avamar-proxy” appears as “ -proxy-1” in Avamar Administrator. Activated and enabled. Disabled. Replicated. This icon is only visible in REPLICATE domain. Unactivated. EMC Avamar 6.1 for VMware User Guide...
Administration Table 7 How VMware clients appear in Avamar Administrator (page 2 of 2) Icon Description Virtual machines Virtual machine. Powered on. Template. Adding virtual machine clients Adding virtual machine clients to a vCenter server or a lower subdomain automatically adds the client to the Default Virtual Machine Group.
Whether or not the virtual machine is a template. Powered On Whether or not the virtual machine is currently powered on. Change Block Whether or not changed block tracking is turned on for this virtual machine. EMC Avamar 6.1 for VMware User Guide...
This feature is enabled by default. EMC strongly recommends that you leave this feature enabled for all virtual machines you will be protecting with Avamar VMware image backup.
Page 54
The Virtual Machines tab displays all available virtual machines administered by vCenter. Virtual machines for which a client already exists in Avamar are disabled. Proxy client virtual machines cannot be selected because they are prevented from backing themselves up with VMware Image plug-in. EMC Avamar 6.1 for VMware User Guide...
This feature is enabled by default. EMC strongly recommends that you leave this feature enabled for all virtual machines you will be protecting with Avamar VMware image backup.
IP address. To rename an existing vCenter client: 1. Ensure that vCenter-to-Avamar authentication is working as described in “Configure vCenter-to-Avamar authentication” on page 2. In Avamar Administrator, click the Administration launcher button. EMC Avamar 6.1 for VMware User Guide...
Page 57
Administration The Administration window appears. 3. Click the Account Management tab. 4. In the tree, select the vCenter client. 5. Select Actions > Account Management > Edit Client. The Edit Client dialog box appears. 6. In the New Client Name or IP field, enter the new fully qualified DNS name. 7.
1. In Avamar Administrator, click the Administration launcher button. The Administration window appears. 2. Click the Account Management tab. 3. In the tree, browse to the REPLICATE domain and select a client. 4. Select Actions > Account Management > View Information. EMC Avamar 6.1 for VMware User Guide...
Administration A dialog box appears, which shows the virtual machine name. If you selected a nonvirtual machine client in step 4, the following message appears: No Information. 5. Click OK. The dialog box closes. vCenter connection monitor Avamar Administrator maintains a pool of connections to the vCenter. As with other essential services, the Administration window Services Administration tab provides continuous status for the vCenter connection.
Any group created under a vCenter server automatically becomes a “vCenter” group. This group behaves similar to non-vCenter groups except that it also provides to ability to specify which proxies are assigned to perform backups on behalf of its group members. EMC Avamar 6.1 for VMware User Guide...
Page 61
Administration Virtual machine and proxy client relationships within vCenter groups Consider the following simplified example configuration: Virtual machines VM-1 and VM-2 store their data in DATASTORE-1 and DATASTORE-2, respectively. Within Avamar Administrator, proxies have been assigned to protect vCenter datastores as follows: PROXY-1 has been assigned to DATASTORE-1 and DATASTORE-2 ◆...
4. In the tree, select a vCenter server. The data table lists the Default Virtual Machine Group, as well as any other vCenter groups that have been added. 5. Select Actions > New Group. The New Group dialog box appears. EMC Avamar 6.1 for VMware User Guide...
• None — No encryption. The exact encryption technology and bit strength used for any specific client-server connection depends on a number of factors, including the EMC Avamar Product client platform and Avamar server version. The Security Guide provides detailed information.
Page 64
14. Select one or more virtual machine clients in the data table. Note: If you have created additional domains below your vCenter server, click Show sub-domain clients to show all available virtual machine clients. EMC Avamar 6.1 for VMware User Guide...
Administration 15. Click Next. The next New Group wizard screen appears. 16. Select one or more proxies in the data table. 17. Click Finish. The New Group dialog box closes. Editing a vCenter group 1. In Avamar Administrator, click the Policy launcher button. The Policy window appears.
Note: Click Show sub-domain clients to show all available clients regardless of which domain you have selected. 4. Select a proxy and click Edit. The Edit Client dialog box appears. 5. Click the VMware tab. EMC Avamar 6.1 for VMware User Guide...
Page 67
Administration 6. Click the Datastores tab. 7. Select one or more datastores. 8. Click the Groups tab. 9. Select one or more groups containing virtual machine clients residing in the datastores selected in step 7. 10. Click OK. The Edit Client dialog box closes. Groups and policy management...
Note: When creating other datasets for use with the Avamar VMware image backup feature, copy this dataset so that you can reuse these recommended settings as the EMC Avamar Administration Guide basis for other datasets. The provides detailed information about adding and copying datasets. EMC Avamar 6.1 for VMware User Guide...
Best practices The following topics describe best practices to follow when configuring and using Avamar for VMware image backup and restore. EMC Avamar Compatibility and Interoperability Matrix EMC Avamar Compatibility and Before upgrading the vCenter infrastructure, refer to the Interoperability Matrix to ensure that Avamar supports that version.
VMX '[VNXe3300-Datastore1] vm-example/vm-example.vmx' will not permit a restore. 2011-12-07 09:30:26 avvcbimage FATAL <0000>: If necessary, use the '--skip_snapshot_check' flag to override this pre-existing snapshot check. 2011-12-07 09:30:26 avvcbimage Error <9759>: createSnapshot: snapshot creation failed EMC Avamar 6.1 for VMware User Guide...
Page 71
Administration To resolve this condition, you must perform a new restore of the affected virtual machine and include the skip_snapshot_check plug-in option in the Restore Options dialog box. This will force that restore operation to overwrite the existing snapshot, which will allow the restore to successfully complete.
Page 72
Administration EMC Avamar 6.1 for VMware User Guide...
CHAPTER 4 Backup This chapter provides instructions for backing up virtual machines. Topics in this chapter include: Limitations......................74 ◆ Performing an on-demand image backup ..............74 ◆ Scheduling backups....................76 ◆ Backup...
4. In the Browse for File, Folders, or Directories pane, do one of the following: • Select the top (root) folder to back up the entire image. • Select one or more disks to only back up those specific virtual disks. EMC Avamar 6.1 for VMware User Guide...
• None — No encryption. Note: The exact encryption technology and bit strength used for any given client/server connection is dependent on a number of factors, including the EMC Avamar Product Security client platform and Avamar server version. The Guide provides additional information.
3. Enable scheduling for the group. A thorough discussion of groups, group policy, datasets, schedules, and retention policies EMC Avamar Administration Guide is beyond the scope of this guide. The provides additional information. EMC Avamar 6.1 for VMware User Guide...
CHAPTER 5 Restore This chapter provides instructions for restoring a complete image, selected drives, or specific folders or files from an Avamar backup. Topics in this chapter include: Overview......................... 78 ◆ Limitations......................78 ◆ Guidelines for performing image restores versus file-level restores......80 ◆...
All restores must be initiated from Avamar Administrator All VMware image restores must be initiated from Avamar Administrator. It is not possible to initiate restores from the virtual machine or proxy client virtual machine. EMC Avamar 6.1 for VMware User Guide...
Page 79
Restore Virtual machine power state When performing an image restore, as described in “Restoring the full image or selected drives to the original virtual machine” on page “Restoring the full image or selected drives to a different (existing) virtual machine” on page 83, and “Restoring the full image or selected drives to a new virtual machine”...
7. In the contents pane, do one of the following: • Select the All virtual disks folder checkbox to restore the entire image. • Select one or more drives to only restore those specific drives. EMC Avamar 6.1 for VMware User Guide...
Page 81
Restore 8. Select Actions > Restore Now. The Restore Options dialog box appears. 9. Select Restore to original virtual machine as the restore destination. Note: When restoring an image backup to the original virtual machine, the Configure Destination button is disabled. 10.
Page 82
17. Click OK. The previous message dialog box closes, and the following message appears: Restore initiated. 18. Click Close to dismiss the message. EMC Avamar 6.1 for VMware User Guide...
Restore Restoring the full image or selected drives to a different (existing) virtual machine 1. In the vSphere Client, ensure that the target virtual machine is powered off. 2. In Avamar Administrator, click the Backup & Restore launcher button. The Backup and Restore window appears. 3.
Page 84
9. Select Restore to a different (existing) virtual machine as the restore destination. Note: When restoring an image backup to a different (existing) virtual machine, the Restore virtual machine configuration option is disabled. 10. Click Configure Destination. The Configure Virtual Machine dialog box appears. EMC Avamar 6.1 for VMware User Guide...
Page 85
• None — No encryption. Note: The exact encryption technology and bit strength used for any given client/server connection is dependent on a number of factors, including the client EMC Avamar Product Security Guide platform and Avamar server version. The provides additional information.
• Select one or more drives to only restore those specific drives. 7. Select Actions > Restore Now. The Restore Options dialog box appears. 8. Select Restore to a new virtual machine as the restore destination. EMC Avamar 6.1 for VMware User Guide...
Page 87
Restore Note: When restoring an image backup to a new virtual machine, the Restore virtual machine configuration option is selected and disabled becuase these configuration files are always required to configure the new virtual machine. 9. Click Configure Destination. The Configure Virtual Machine dialog box appears. 10.
Page 88
21. Select one of the following settings in the Select Post Restore Options list: • Do not power on VM after restore. • Power on VM with NICs enabled. • Power on VM with NICs disabled. EMC Avamar 6.1 for VMware User Guide...
Restore 22. (Optional) To include plug-in options with this restore, configure the settings. “Plug-in Options” on page 99 provides detailed information. 23. Click OK. The Restore Options dialog box closes and the following message appears: Restore initiated. 24. Click Close. Restoring specific folders or files You cannot restore more than 5,000 folders or files in the same file-level restore operation.
Page 90
16. Click OK. The Restore Options dialog box closes. The Restore Request dialog box appears and shows that a restore request has been initiated. 17. Click Close. The Restore Request dialog box closes. EMC Avamar 6.1 for VMware User Guide...
CHAPTER 6 Protecting the vCenter Management Infrastructure This chapter describes how to protect the vCenter management infrastructure with Avamar. Topics in this chapter include: Overview......................... 92 ◆ Backing up the vCenter management infrastructure..........92 ◆ Recovering vCenter management infrastructure from Avamar backups..... 95 ◆...
You should then add the vCenter Avamar clients to a group and schedule these backups at regular intervals. A comprehensive discussion of groups, group policy, datasets, schedules, and retention EMC Avamar Administration Guide policies is beyond the scope of this publication. The provides detailed information. EMC Avamar 6.1 for VMware User Guide...
To protect the vCenter management infrastructure: Install and register Avamar Client for Windows software on the vCenter host as ◆ EMC Avamar Backup Clients User Guide described in the Install and register the correct Avamar database software on each database host as ◆...
Install Avamar database backup agents on the database hosts as described in the EMC Avamar for SQL Server User Guide database-specific documentation, such as the Configure a scheduled backup to protect the databases. EMC Avamar 6.1 for VMware User Guide...
Recovering vCenter management infrastructure from Avamar backups is a two-step process in which you first create a restore target virtual machine with a fresh operating system image, then restore the vCenter management infrastructure components from the EMC Avamar Administration Guide latest Avamar backup. The provides detailed information.
Page 96
Protecting the vCenter Management Infrastructure EMC Avamar 6.1 for VMware User Guide...
APPENDIX A vSphere Data Ports This appendix lists Avamar port usage in a typical vSphere environment. Topics in this chapter include: Communication ports....................98 ◆ Listen ports......................98 ◆ vSphere Data Ports...
APPENDIX B Plug-in Options The following topics provide information about backup and restore plug-in options for various Avamar for VMware image backup and restore plug-ins: How to set plug-in options ..................100 ◆ Linux VMware Image plug-in options ..............100 ◆...
Plug-in Options Windows VMware Image plug-in options This topic describes the available options for the Avamar Windows VMware Image plug-in. Table 20 Windows VMware image backup options Setting Description Use changed block tracking If selected, the VMware changed block tracking feature is used to to increase performance identify areas of the virtual machine filesystem that have changed since the last backup and only process those changed areas during...
Page 102
Plug-in Options EMC Avamar 6.1 for VMware User Guide...
Page 103
Default Group 28 guest 15, 16, 17, 18, 47, 50, 53, 55, 69, 92, 93 Default Proxy Group 60 monitoring 74 Default Virtual Machine Group 28, 51, 60, 62, 68 on-demand 75, 100 EMC Avamar 6.1 for VMware User Guide...
Page 104
75, 100 Avamar Administrator 22 OpenSSH keys 57 vSphere client 21 operating systems IP address 21, 22, 29, 30, 31, 38, 41, 44, 56, 57, 69 CentOS Linux 15 ISO images 44 EMC Avamar 6.1 for VMware User Guide...