Select Virtual Machine Dialog Box Functions; New Virtual Machine Client Settings - EMC Avamar 6.1 User Manual

The options at the top of the Select Virtual Machine dialog box perform the following
functions:
Table 9 Select Virtual Machine dialog box functions
Option
vSphere View - Virtual machines and
template views
vSphere View - Hosts and Clusters
view
Show sub-domain virtual machines
Virtual Machine Properties - Enable
changed block tracking
8. Select a virtual machine.
9. To enable changed block tracking for this client, select Enable changed block tracking.
Turning on changed block tracking will not take effect until any of the following actions
occur: power on, resume after suspend, migrate, snapshot create, delete, or revert.
10. Click OK.
The new client name apears in the New Client dialog box with the fully-qualified name
of the selected virtual machine.
11. If desired, type the following optional information:
Table 10 New virtual machine client settings
Setting Description
Contact Optional contact name.
Phone Optional contact telephone number.
Email Optional contact email address.
Location Optional contact location.
Description
The view is representative of vCenter's Virtual Machines
and Template views.
The view is representative of vCenter's Hosts and Clusters
view.
Displays all virtual machines in the vCenter.
If a virtual machine is already being protected with guest
backup, it is shown as disabled in this view.
If selected, the changed block tracking is enabled.
Note: If changed block tracking is not enabled, the virtual
machine image must be fully processed for each backup,
which might result in unacceptably long backup windows,
and excessive back-end storage read/write activity.
This feature is enabled by default. EMC strongly
recommends that you leave this feature enabled for all
virtual machines you will be protecting with Avamar
VMware image backup.
Basic client administration
Administration
53