EMC Avamar 6.1 User Manual page 82

Restore
EMC Avamar 6.1 for VMware User Guide
82
11. Select one of the following encryption methods for client/server data transfer during
this restore:
• High — Strongest available encryption setting for that specific client platform.
• Medium — Medium strength encryption.
• None — No encryption.
Note: The exact encryption technology and bit strength used for any given
client/server connection is dependent on a number of factors, including the client
platform and Avamar server version. The
additional information.
12. Click More Options.
The Restore Command Line Options dialog box appears.
13. Select or clear Use changed block tracking to increase performance.
14. Select one of the following settings in the Select Post Restore Options list:
• Do not power on VM after restore.
• Power on VM with NICs enabled.
• Power on VM with NICs disabled.
15. (Optional) To include plug-in options with this restore, configure the settings.
Options" on page 99
16. Click OK.
The Restore Options dialog box closes, and the following warning message appears:
Hardware compatibility issues between source, and target
destinations may result in a non-operational restored virtual
machine.
This message is advising you that the restored virtual machine might not boot if the
virtual machine configuration has changed since the backup was taken.
17. Click OK.
The previous message dialog box closes, and the following message appears:
Restore initiated.
18. Click Close to dismiss the message.
EMC Avamar Product Security Guide
provides detailed information.
provides
"Plug-in