The Hp Rack System/E - HP LP 2000r Planning Manual

HP Netserver High Density Rack Solutions Overview (LP 2000r)
HP Rack System/E
The HP Rack System/E is a full-featured, advanced rack for the most demanding rackmount requirements today
and in the future.
Designed for flexibility, the
HP Rack System/E base rack
and accessories can be
c o n f i g u red to adapt to a
b road range of re q u i re m e n t s .
P e rforated doors for
v e n t i l a t i o n
Snap side panel allows
easy access
Selection
Three sizes — 41U, 33U, 25U — offer a range of rackmount capacity. Racks can stand alone or be attached
together in a multi-rack unit. Doors can be mounted to open to the left or right.
As your needs grow, the HP Rack System/E can grow vertically with an 8U extension kit. With the kit, the
25U rack becomes 33U, the 33U rack becomes 41U, and the 41U rack becomes 49U.
Ventilation
The HP Rack System/E allows air to flow freely, for better cooling. The top is fully ventilated, and perforat-
ed doors provide 63% opening.
10
The clean, contemporary look of
HP Rack System/E showcases
your computers and peripherals.
12-gauge columns pro v i d e
s t re n g t h
Anti-tip foot