Brother DCP-J132W User Manual page 72

Menu (continued)
Level1 Level2
4.Print Reports 1.User Settings
2.Network Config —
3.WLAN Report
5.Machine Info. 1.Serial No.
2.Version
0.Initial Setup 1.Date&Time
2.LCD Contrast —
3.Sleep Mode
4.Reset
5.Auto Power Off —
0.Local Language
(depending on
your country)
See Advanced User's Guide.
The default settings are shown in Bold with an asterisk.
64
Level3 Options
— —
—
— —
— —
— —
— —
Light
Dark*
—
1 Min
2 Mins
3 Mins
5 Mins*
10 Mins
30 Mins
60 Mins
1.Machine Reset a Reset b Exit
2.Network a Reset b Exit
3.All Settings a Reset b Exit
Off
1hour*
2hours
4hours
8hours
— (Choose the
language you
want to use)
Descriptions
Prints these lists and
reports.
Lets you check the serial
number of your machine.
Lets you check the
firmware version of your
machine.
Sets the date and time in
your machine.
Adjusts the contrast of the
LCD.
You can choose how long
the machine will remain
idle before it goes into
Sleep mode.
Resets all the machine's
settings that you have
changed, such as the
Date and Time.
Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
Resets all the machine's
settings back to the
factory default.
When this feature is set to
On the machine will turn
itself off one hour after
entering Sleep Mode.
When set to Off, the
machine will not power off
automatically.
Allows you to change the
LCD language for your
country.
C
Page
See .
58
37
See .
58
See .