Brother DCP-J132W User Manual page 48

Error Message
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
Close Ink Cover
Cover is Open
Data Remaining
High Temperature
40
Cause
The machine has a mechanical
problem.
A foreign object, such as a paper clip
or a piece of ripped paper, is in the
machine.
The ink cartridge cover is not locked
in the closed position.
The scanner cover is not locked in the
closed position.
Print data is left in the machine's
memory.
The room temperature is too high.
Action
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, disconnect the
machine from the power for several
minutes and reconnect it.
Firmly close the ink cartridge cover
until it locks into place.
Lift the scanner cover, and then close
it again.
Make sure the USB cable (if used)
have been guided correctly through
the cable channel and out the back of
the machine.
Press Stop/Exit. The machine will
cancel the job and clear it from the
memory. Try to print again.
After lowering the room temperature,
allow the machine to cool down to
room temperature and then try again.