Bissell 44L6 series User Manual page 9

o
perations
Empty the 2-in-1 water tank (cont)
2. Empty collection water from bottom of tank.
3. After each use, remove and rinse the lint
screen located on the tank lid.
4. If nozzle needs to be cleaned, remove
by grasping handle at the top and
pulling forward. Clean removable
nozzle by rinsing under running water.
5. When finished, replace nozzle by slightly
raising front of machine to line up slots on
the base with the hooks on nozzle. Attach at
base first and then click nozzle into place.
NOTE: If nozzle is not attached
properly loss of suction will occur.
6. To continue carpet cleaning, refer back to
pages 7 through 8, beginning with "Fill the
2-in-1 water tank" on page 7.
If cleaning is complete, refer to the
"Maintenance and care" section on
page 12.
Ready Tools™
Your PowerWash PowerBrush Select
deep cleaner comes equipped with a
hose and at least one attachment for
cleaning stairs, upholstery, and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1. Check manufacturer's tag before cleaning.
"W" or "WS" on the tag means you can use
your deep cleaner. If the tag is coded with
"X" or "S" (with a diagonal strike through),
or says "Dry Clean Only," do not proceed.
Do not use on velvet or silk. If manufacturer's
tag is missing or not coded, check with your
furniture dealer.
2. Check for colourfastness in an
inconspicuous place.
3. If possible, check upholstery stuffing.
Coloured stuffing may bleed through fabric
when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean in
fabric folds and tufts.
w w w . b i s s e l l . c o m
2.
3. Lint Screen
5.
Manufacturer's tag
4.
9