Installation Method - VIETA HA3000BT User Manual

Installation method

This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements
of this Instruction Manual, then install the metal mounting sleeve into the car as per the diagram illustrated
below.
METAL SUPPORT
DASHBOARD
METAL MOUNTING SLEEVE
To remove the unit out of the metal mounting
sleeve, insert the two supplied KEYS into the left
and right side slots of the chassis at the same
time. Then pull the chassis out of the metal
mounting sleeve as shown in the right
17
STRAP
FIXED FACEPLATE
illustration.
To boost up the capability of anti-jamming,
please make sure fix tightly the metal support
strap into the metal joint that connect to the
chassis of the car.
UNIT CHASSIS
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver
FRONT PANEL
PLASTIC TRIM RING
USB/SD Android Radio