Radio Operation - VIETA HA3000BT User Manual

CLK OFF: Clock will disappear fromthe display when
power is off.
6. To remove front control panel
Press RELEASE button to release front control panel
fromunit chassis, then you can remove it fromunit
chassis.
When front control panel is removed, the LED
indicator on front cabinet flashes.
7. To reset unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections. You must reset the unit.
To reset the unit, remove the front control panel, then
press RESET button with a cuspidal object.
This operation will erase clock setting and some
stored contents.

Radio operation

1. To select radio band
Press BAND button briefly and repeatedly to select
a desired radio band in sequence and circulation as
follows:
-->FM1-->FM2-->FM3-->AM1-->AM2--> .
2. To search for radio station manually or
automatically
Press and hold the >>| button to activate MANUAL
searching mode.
IN MANUAL mode: Press the >>| or |<< button
briefly to manual tune up/down for the desired radio
station frequency step by step.
INAUTO mode: Press the >>| or |<< button, to
automatically tune up/down for the radio station
frequency.(If in MANUAL mode and without further
operation, the unit will change to AUTO mode a few
seconds later.)
3. To store current station or turn on a preset one
1) Press one of the 6 number buttons and hold for
more than 1 second to store the current station in the
preset memory bank of the number button for the
current band.
In this way the unit can store 30 preset stations.
2) Press one of the 6 number buttons briefly to turn
on the preset station stored in the preset memory
bank of the number button for the current band.
* When PTY mode is on, the 6 number buttons are
shared as follows:
PTY music group
1. POP M, ROCK M
2. EASY M, LIGHT M
3. CLASSICS, OTHER M
4. JAZZ, COUNTRY
5. NATION M, OLDIES
6. FOLK M
14
PTY speech group
1. NEWS, AFFAIRS, INFO
2. SPORT, EDUCATE, DRAMA
3. CULTURE, SCIENCE, VARIED
4. WEATHER, FINANCE, CHILDREN
5. SOCIAL, RELIGION, PHONE IN
6. TRAVEL, LEISURE, DOCUMENT
4. To scan for each preset station or auto search for
the strongest stations
1) When pressing and holding APS button for more
than 1 second, the radio searches fromthe current
frequency and checks the signal strength level until
the 6 strongest stations are found. And then the 6
strongest stations are preset to the corresponding
preset memory numbered bank. The auto-storage
operation is implemented in the each selected band.
When the auto-storage operation is finished, the
radio executes Preset scan.
2) When pressing APS button briefly, the radio
searches for each preset station in the current band
and holds at that preset station for 5 seconds while
releasing mute, and then searches again.
5. To search for stations with a PTY (PROGRAMTYPE)
program
Press and hold PTY/MODE on main unit to select one
of PTY programs such as:
POP M- - NEWS-- off. While selecting POP M or
NEWS, pressing one of 6 preset buttons briefly and
repeatedly can select your desired PTY program as
described in preset buttons.
When turning on a PTY program, the PTY program
and PTY word is flashed on LCD.
After selecting a desired PTY programand no
operation for 2 seconds, it will search for the station
of the PTY program. During 1 loop, if the desired
station of the PTY programis not found, PTY NONE is
displayed, then returns to previous normal radio and
PTY icon disappears.
6. AF [ALTERNATIVE FREQUENCIES]
When AF switching mode is selected and the state
of AF switching mode is displayed by AF segment in
display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS
information.
Segment flashing: AF switching mode on, but RDS
information is not received yet.
When AF switching mode is selected, the radio
checks the signal strength of AF all the time. The
interval of checking time of each AFs depends on
the signal strength of the current station, from a few
minutes for strong station to a few seconds for weak
station.
USB/SD Android Radio