Usb/Card Operation - VIETA HA3000BT User Manual

Every time that newAF is stronger than current
station, it switches over to that frequency for a very
short time, and the NEWFREQUENCY is displayed
for 1-2 seconds.
Because the mute time of AF switching or checking
time is very short, it is almost inaudible in case of
normal program.
During FMmode, when AF is on, SEEK, (SCAN),
AUTO-MEMORY function can only receive and save
RDS program.
7. TA [TRAFFICANNOUNCEMENT]
When TA mode is on(TAis displayed on LCD), it
will begin to seek TA station and TA SEEK will be
displayed on LCD for a while.
When traffic announcement is transmitted:
1). If the unit is in SD, USB mode, it will switch to
radio mode temporarily.
2). If volume level is below 20, volume level is raised
to 20, and returns to its previous mode and volume
level when the traffic announcement is over.
If volume is adjusted during traffic announcement,
only the traffic announcement volume is valid.
* TA interruption function:
The current traffic announcement is cancelled by
pressing this key. But the TA mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY
function can be received or saved only when traffic
program identification code has been received.

USB/Card operation

1. To insert or pull out SD card or USB stick
When needing to playback SD or USB music, remove
front control panel or open the cover of USB socket,
then insert SD card or USB stick into SD slot or USB
socket. Then the playing mode will be changed into
SD or USB mode and display Card or USB on LCD
(When SD card and USB stick are both inserted into
their slot or socket, the playing mode will be changed
into the mode of the latter one), and then play the first
track of SD or USB.
2. To select next or previous track to play
Press >>| or |<< button to select next or previous
track to play.
3. To play fast forward or backward
Press and hold >>| or |<< button to play fast
forward or backward.
4. To play previous or next 10th track
Press 5/-10 or 6/+10 button to p lay previous or next
10th track.
5. How to use 1/>||/TOP button
During playback, press 1/>||/TOP button to pause
playback. When in pause mode, press 1/>||/TOP
button to play again.
Press and hold 1/>||TOP button to select the first
track for playback.
6. To scan tracks
During playback, press INT button briefly to play the
first 10 seconds of each track, press INT button again
to cancel INT function and retain playing the track
currently selected.
7. To repeat track(s)
During playback, press RPT button briefly to play
the current track repeatedly, and the LCD will display
RPT ONE.
Press and hold the RPT button to play the tracks in
the Albumrepeatedly, and the LCD will display D-RPT.
Press RPT button again to cancel RPT function, and
the LCD will display RPT OFF.
8. To play tracks in random
During playback, press RDMbutton briefly to play
all tracks in random. Press it again to cancel RDM
function.
9. To quickly select a track to play press APS
button repeatedly to select TRACK SEARCH, FIRST
CHARACTER SEARCH or DIRECTORY SEARCH
mode.
1) In TRACK SEARCH mode , the LCD will display
TRK 000 and flash the biggest digit 0 that the USB
stick or SD card contains. Then use volume control
to enter a number of the flashing digit from 0 ~ 9.
Then press SEL button to confirm the number and
flash next smaller digit 0. With the same means, enter
the number of the other flashing digit. After finishing
entering the number of all flashing digits, press BAND
button to play the track of the selected serial number.
2) No modo FIRST CHARACTER SEARCH, o LCD
vai exibir A--SEARCH, se existirem alguns nomes
de ficheiros cujos primeiros caracteres sejam A,
SEARCH vai alterar para o primeiro nome do ficheiro
cujo primeiro caracter seja A, pela ordem de A~Z e
0~9; caso contrário, alterará para NONE.
Utilize o controlo do volume para seleccionar o
primeiro caracter dos ficheiros pela ordem de
A~Z e 0~9. Prima >>| ou|<< para seleccionar o
primeiro caracter de um ficheiro como aquele que foi
seleccionado.
Finalmente, prima BAND para reproduzir o ficheiro
seleccionado.
3) No modo DIRECTORY SEARCH, o LCD vai exibir
a pasta de raíz (se não existir pasta de raíz, vai
encontrar uma pasta de raíz chamada D-ROOT).
Utilize o controlo do volume para seleccionar a
pasta desejada e prima BAND para entrar na pasta
e reproduzir a primeira faixa da pasta, e prima
>>|/|<< para reproduzir a faixa desejada da pasta.
15