Specifications - Extech Instruments SC600 User Manual

Specifications
Display
Ranges and Resolution
Unit of measure
Accuracy
Sampling time
Tare Control
Transducer type
User Calibration
Data output
Over range indication
Under range indication
Low battery indication
Power supply
Power consumption
Operating Temperature
Operating Humidity
Dimensions
Weight
All rights reserved including the right of reproduction in whole or in part in any form
5‐digit multi‐function LCD
Digit height: 20.9mm (0.8")
0.10 to 600g (resolution: 0.01g)
0.005 to 9.9995 oz. (resolution: 0.0005 oz.)
10.000 to 21.164 oz. (resolution: 0.001 oz.)
Selectable via rear switch (grams/ounces)
± (0.05% + 0.04g); within 2 hours of calibration
Accuracy applies at 23
following RF environmental conditions: field strength < 3V/M and
frequency < 30MHz only)
Approx. 1 measurement per second
600g maximum (approx.)
Load cell
Using 200g or 400g standard weights (not supplied)
RS232 PC interface jack on rear of instrument
Optional PC interface cable and software PN 407001
Optional USB adaptor PN 407001‐USB
Upper dashes ‐ ‐ ‐ ‐ ‐ ‐ appear on the LCD
Lower dashes _ _ _ _ appear on the LCD
'LO' Battery icon appears on the LCD
6 x 1.5V AA batteries or power adaptor 9V/300mA (supplied with
multi‐plugs)
17mA DC approximately
o
0 to 50 C (32 to 122
< 80% RH
Base: 250 x 190 x 70mm (9.8 x 7.5 x 2.8")
Platform diameter: 120 mm (4.7")
1 kg (2.2 lbs.)
Copyright © 2014 FLIR Systems, Inc.
www.extech.com
o o
C ±5 C (specifications tested under the
o
F)
9 SC600‐EU‐EN v1.3 4/14