Extech Instruments SC600 User Manual page 2

Introduction
Thank you for selecting the Extech Instruments Model SC600 Electronic Counting Scale/Balance.
The SC600 is microprocessor controlled and uses a load cell transducer for high accuracy and
optimum performance. The SC600 offers a large measurement capacity, high resolution, and large
easy to read display. The slide switch on the back of the scale allows for the selection of
measurement units (gram or ounce).
A self‐calibration utility is built‐in and the calibration data is stored internally even upon power
down. The RS‐232 PC interface allows for the transfer of measurement data between the SC600
and a PC.
The SC600 includes 'bubble' level, adjustable rubber feet for leveling, and heavy duty ABS plastic
housing. An AC adaptor may be used to power the unit or the unit may be used on battery power.
This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable
service. Please visit our website (www.extech.com) to check for the latest version of this User
Guide, Product Updates, and Customer Support.
2 SC600‐EU‐EN v1.3 4/14