Priority Of Displays For Multi-Partition And Multi-Panel Modes - First Alert FA1660C User Manual

Accessing Other Panels (cont'd)
Press
of the original partition of the original panel for the keypad. Also, this mode
will end in approximately 2 minutes if no keys are pressed.
NOTES:
When performing any of the arming commands, if there are faults in any of
the partitions of a panel, the system will not arm that panel, but will arm all
the other partitions of the other panels.
When performing either a STAY or INSTANT arm command the system
always arm in mode 1.
The user cannot execute another panel linking mode. To execute another
panel linking mode or to access a different remote panel, the user must first
exit this mode (return to the original control panel).

Priority of Displays for Multi-Partition and Multi-Panel Modes

This table shows the priority of displays if more than one of the conditions
exists at the same time.
– 30 –
0 to exit mode. After a few seconds, the keypad displays the status
Priority Description
1 Fire Alarm
2 All Other Alarms
3 AC Loss
4 Comm Fail
5 System Low Battery
6 Trouble
7 Bypass
8 Not Ready
9 Ready
10 Armed STAY
11 Armed AWAY
12 Armed INSTANT
13 Armed MAXIMUM
Display
F
✴
P
C
L
T
B
N
R
S
A
I
M