HP Integrity rx2600 Getting Started Manual page 41

LAN LED Location
1. Speed Tower: Right
Rack-mounted: Top
2. Activity Tower: Left
Rack-mounted: Bottom
LAN LED Location
1. Self-test Tower: Right
Rack-mounted: Top
2. 10BT Tower: 2nd from right
Rack-mounted: 2nd from top
3. 100BT Tower: 2nd from left
Rack-mounted: 2nd from bottom Blinking Green
4. Standby Tower: Left
Power
Rack-mounted: Bottom
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
Two System Management 10/100 LAN LEDs are on the rear panel:
Four MP LAN LEDs are also on the rear panel if the system has a
MP card installed:
Color State
On Port linked at 100 Mb/s
Off Port linked at 10 Mb/s
On Port linked
Off No link established
Color
Yellow
Off
Green
Blinking Green
Off
Green
Off
Green
Off
Troubleshooting
State
MP running self test or error
MP has booted
10BT link established
10BT activity
No link or 100BT link
100BT link established
100BT activity
No link or 10BT link
Standby Power on
Standby Power off
2–9